Kenwood KMM-BT318U Instructional Manual - Page 29
F - HPF FRQ
View all Kenwood KMM-BT318U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
AUDIO SETTINGS SPEAKER SIZE FRONT REAR SUBWOOFER X ' OVER TWEETER FRONT HPF The frequency and slope settings are automatically set for the crossover of the selected speaker. SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/ 7×10: Selects according to the connected speaker size for optimum performance. TWEETER SMALL/MIDDLE/LARGE: Selects according to the size range of the connected tweeter for optimum performance. ; NONE: Not connected. 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/7×10: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. 6.5"/8"/10"/12"/15" OVER: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ 10KHZ/12.5KHZ: Adjusts the crossover frequency for the tweeter speaker. GAIN LEFT -8 to 0: Adjusts the output volume of the left tweeter. GAIN RIGHT -8 to 0: Adjusts the output volume of the right tweeter. F - HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/ 120HZ/150HZ/180HZ/220HZ/250HZ: Adjusts the crossover frequency for the selected speakers (high pass filter). ; THROUGH: All signals are sent to the selected speakers. F - HPF SLOPE -6DB/-12DB/-18DB/-24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [F - HPF FRQ].) F - HPF GAIN -8 to 0: Adjusts the output volume of the selected speaker. REAR HPF R - HPF FRQ R - HPF SLOPE (Refer FRONT HPF settings.) R - HPF GAIN SUBWOOFER SW LPF FRQ LPF 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/ 100HZ/120HZ/150HZ/180HZ/220HZ/ 250HZ: Adjusts the crossover frequency for the subwoofer (low pass filter). ; THROUGH: All signals are sent to the subwoofer. SW LPF SLOPE -6DB/-12DB/-18DB/-24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) SW LPF PHASE REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. SW LPF GAIN -8 to 0: Adjusts the output volume of the subwoofer. DTA SETTINGS For settings, 26, Digital Time Alignment settings. CAR SETTINGS • The following item is selectable only if [SUBWOOFER SET] is set to [ON] ( 24): - [SUB-W LEVEL] - [SUBWOOFER] of [SPEAKER SIZE] - [SUBWOOFER LPF] of [X'OVER] - [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS] • The following item is selectable only if a setting other than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]: - [TWEETER], [REAR HPF], [SUBWOOFER LPF] of [X'OVER] ENGLISH 25