Kenwood KMM-BT318U Instructional Manual - Page 23
Improve the voice quality, Make the settings for receiving a call
View all Kenwood KMM-BT318U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
BLUETOOTH® To On the faceplate While talking on the first incoming call... Answer another incoming Press . call and hold the current call Reject another incoming call Press . While having two active calls... End current call and activate Press . held call Swap between the current call and held call Press . Adjust the phone volume [00] to [35] (Default: [15]) Turn the volume knob during a call. • This adjustment will not affect the volume of the other sources. Switch between hands-free and private talk modes Press during a call. • Operations may vary according to the connected Bluetooth device. On the remote control Press . Press . Press . Press . ( Not available ) ( Not available ) Improve the voice quality While talking on the phone... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . MIC GAIN NR LEVEL ECHO CANCEL Default: XX -10 to +10 (-4): The sensitivity of the microphone increases as the number increased. -5 to +5 (0): Adjust the noise reduction level until the least noise is being heard during a phone conversation. -5 to +5 (0): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. Make the settings for receiving a call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . Default: XX SETTINGS AUTO ANSWER 1 to 30: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels. BATT/SIGNAL* AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels. Clock time is shown. * Functionality depends on the type of the phone used. ENGLISH 19