Kenwood KMR-M505DAB Instruction Manual - Page 11
Change the crossover type
View all Kenwood KMR-M505DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
GETTING STARTED [P-OFF WAIT] Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery. [20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ; [- - -]: Cancels [F/W UPDATE] [UPDATE SYSTEM]/[UPDATE DAB] [F/W UP xxxx]/ [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not [F/W UP xxxxx] activated). For details on how to update the firmware, visit . [FACTORY RESET] [CLOCK] [CLOCK DISPLAY] [ENGLISH ESPANOL] [FRANCAIS] [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels. (For only) [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. Change the crossover type 1 Press BSRC repeatedly to enter STANDBY. 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select "2WAY" or "3WAY", then press the knob. 4 Turn the volume knob to select "YES" or "NO", then press the knob. The selected crossover type appears. • To cancel, press and hold . • To adjust the selected crossover settings, see page 22. Caution: Select a crossover type according to how the speakers are connected. (Page 33, 34) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. ENGLISH 5