Kenwood KOS-V500 Instruction Manual - Page 55

4 Selects a navigation system connection. ( RGB) "RGB": Allows the Kenwood's Navigation System to connect via its interface cable. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT1 port. "Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.) 5 Returns to the original screen. 6 7 8 6 Selects an AV source to be output at the AV OUTPUT port. ( AV-IN1) 7 Sets a method to switch to the rear view camera video display. ( Off ) "On": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse". "Off": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [V.SEL] switch several times. 8 You can flip the left and right of the rear view camera video display. Set to "Reverse" and the the rear view will be displayed left and right in mirror image on the screen. ( Off ) 9 10 11 12 9 Selects speakers used for voice guidance of the navigation system. ( F-Left) "F-Left": Uses the front left side speaker for voice guidance. "F-Right": Uses the front right side speaker for voice guidance. "Front All": Uses both front speakers for voice guidance. p Adjusts the volume for voice guidance of the navigation system. ( 21) q Mutes the volume during voice guidance of the navigation system. ( On) When turned "On", the volume level drops for voice guidance. w Sets a selecting method of audio source from the Navigation system.( Off ) "On": Allows you to select the audio source input from the Navigation system interface by pressing [SRC] or selecting it on Source Select screen. "Off": The audio source cannot be selected using [SRC] or on Source Select screen. English 55