Kenwood MP928 Instruction Manual - Page 16
Bypass Control, Memory mode, Memory Recall mode
UPC - 019048162328
View all Kenwood MP928 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
General features Bypass Control Temorarily bypassing DSP (Digital Signal Processor) System. 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "DSP" appears. Refer to (page 9). 3 Enter Bypass Control mode Turn the [VOL] knob to select "DSP". Press the [VOL] knob. 4 Put in the memory Turn the [VOL] knob to select "Memory1" or "Memory2". Press the [VOL] knob for at least 2 seconds. The "MEMORY" display blinks 1 time. 5 Exit Memory mode Turn the [VOL] knob to select "Return". Press the [VOL] knob. • "Memory1": When you press the Reset, all the sources will be the setting value which is registered. • The following items cannot be registered. Rear Volume, Balance, Fader, Position Setting, System Q Setting • When "2ZONE" of (page 11) is ON, you cannot select "DSP". 4 Set up Bypass Press the [VOL] knob. "Bypass": There is no effect by DSP. "Through": There is an effect by DSP. • When the mode is set to "Bypass", DSP System cannot be adjusted. • When the mode is set to "Bypass", ODD D/A System is not effective. Memory mode Storing the values of Sound Control in memory. 1 Setup Sound Control Refer to the following operations to setup the Sound Control. - (page 11) - (page 12) - (page 13) - (page 14) 2 Select the Preset Memory item Turn the [VOL] knob to select "Preset". Press the [VOL] knob. 3 Enter Memory mode Turn the [VOL] knob to select "Memory". Press the [VOL] knob. Memory Recall mode Recall the value in the memory by the memory mode. 1 Select the source to adjust Press the [SRC] button. 2 Show the Multi-function display Press the [NEXT] button repeatedly until "S.F.C" appears. Refer to (page 9). 3 Select the key function which contains the item you wish to recall Turn the [VOL] knob to select "S.F.C"/ "S.M.S"/ "EQ". Press the [VOL] knob. 4 Select the Preset Memory item Turn the [VOL] knob to select "Preset". Press the [VOL] knob. 5 Enter recall mode Turn the [VOL] knob to select "Recall". Press the [VOL] knob. 6 Select the recall item Turn the [VOL] knob to select "Recall1" or "Recall2". Press the [VOL] knob for at least 2 seconds. The "RECALL" display blinks 1 time. 16 | English