Kenwood MP928 Instruction Manual - Page 45
Touch Sensor Tone, Manual Clock Adjustment
UPC - 019048162328
View all Kenwood MP928 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
• When you activate the Security Code function, the code cannot be changed and the function cannot be released. Note, you can set the Security Code with a 4 digit number of your choice. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security" is also displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "CODE" is also displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "Appoved" is displayed. The Security Code function activates. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep: ON" "Beep: OFF" Setting Beep is heard. Beep canceled. In Standby mode Manual Clock Adjustment • You can do this adjustment when the (page 46) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards [4] or [¢]. Select the "Clock Adjust" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. • If you enter the wrong Code in steps 4 through 6, repeat from step 4. 9 Exit Security Code mode Press the [MENU] button. Press the Reset button when the audio unit is removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "Appoved" is displayed. You can being using the unit. English | 45