Kenwood MP928 Instruction Manual - Page 28

General features Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD. 1 Receive/play the station/disc you want to attach a title to • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Name set mode Push the Control knob towards [4] or [¢]. Select the "Name Set" display. 4 Enter Name set mode Press the Control knob for at least 1 second. 5 Move the cursor to the enter character position Push the Control knob towards [4] or [¢]. 6 Select the character type Press the Control knob. Each time you press the knob, the character type alternates between the types shown in the table below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) Display "A-Z" "a-z" "1•*" "ë" 7 Select the characters Push the Control knob towards [FM] or [AM]. 9 Exit Menu mode Press the [MENU] button. • When operation stops for 10 seconds the name at that time is registered, and Menu mode closes. • Memory numbers - FM/AM: 30 stations - Internal CD player: 10 discs - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • Change the title of station/CD by the same operation used to name it. TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "Call" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "Call" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "Call" display disappears and the audio system comes back ON. • Enter characters by using a remote control with numbers buttons. Example: If you are entering "DANCE". Character "D" "A" "N" "C" "E" Button [3] [2] [6] [2] [3] Times pressed 1 1 2 3 2 8 Repeat steps 5 through 7 and enter the name. 28 | English