Kenwood PKT-23 Operation Manual - Page 11
Charging with the KSC-44CR Charger
View all Kenwood PKT-23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3 When charging is complete, the LED indicator turns off. • It takes approximately 4 hours to charge the battery pack. LED Indicator Note: ◆ Use a USB cable shorter than 3 meters. ◆ We recommend using a short USB cable (low loss) for charging. ■ Charging with the KSC-44CR Charger 1 Plug the AC adapter cable into the jack located on the bottom of the charger. 2 Plug the AC adapter into an AC outlet. 3 Slide a transceiver equipped with a battery pack into the charging slot of the charger. • Make sure the metal contacts of the transceiver mate securely with the charger terminals. LED • The LED indicator lights blue. Indicator 4 When charging is complete, the LED indicator turns off. Remove the transceiver from the charging slot of the charger. • It takes approximately 4 hours to charge the battery pack. • Transmission is inhibited while charging. • When the charger will not be used for a long time, unplug the AC adapter from the AC outlet. 3