Kenwood PKT-23 Operation Manual - Page 22
Channel Setup Mode - frequencies
View all Kenwood PKT-23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
CHANNEL SETUP MODE This transceiver allows you to reprogram each of the channels with different frequencies and QT (Quiet Talk)/ DQT (Digital Quiet Talk) settings. The table below lists the default channel settings. Channel Number 1 2 3 4 5 6 7 8 Table Number 1 8 3 6 4 2 7 5 Frequency (MHz) 446.00625 446.09375 446.03125 446.06875 446.04375 446.01875 446.08125 446.05625 Tone Number 10 8 13 5 17 18 19 7 QT/DQT Setting 94.8 Hz 88.5 Hz 103.5 Hz 79.7 Hz 118.8 Hz 123.0 Hz 127.3 Hz 85.4 Hz OPERATING FREQUENCY AND QT/ DQT SETTING To change the operating frequency of a channel: 1 With the transceiver power OFF, press and hold the PTT switch and Up key while turning the transceiver power ON. • Continue to hold the Power switch, PTT switch, and Up key until the LED indicator lights yellow and the transceiver announces "Self". 2 Release the Power switch, PTT switch and Up key. • The transceiver announces "Channel Number". 3 Press the Up/Down key to select your desired channel, then press the PTT switch to confirm the selected channel. • Upon releasing the PTT switch, a beep will sound and the transceiver announces "Table Zero". 4 Press the Up/Down key to increment/ decrement the Table number, to select the new channel frequency. • Press and hold the Up/Down key to continuously increment/ decrement the number. 14