Kenwood VRS-7200 Instruction Manual - Page 17

Let's play DVD video software If you use another speaker system want a setup according to it: 1 Press the MULTI CONTROL @ / # to select "CUSTOM" and press the ENTER to select each of the speaker setup items. 2 Press the MULTI CONTROL @ / # to select the speaker setup item. Press the MULTI CONTROL % / fi to select the setting for each item. Subwoofer : "SUBW" Front speakers : "FRNT" Center speaker : "CNTR" Surround speakers : "SURR" Back Surround speakers : "BS" BS/SW Amp : "BS/SW" Subwoofer re-mix setting : "REMIX" ] "ON" or "OFF" ] "LRG" or "NML" ] "LRG", "NML" or "OFF" ] "LRG", "NML" or "OFF" ] "LRG", "NML" or "OFF" ] "BS", "SW" or "OFF" ] "ON" or "OFF" "ON" : A subwoofer is connected. Subwoofer re-mix setting mode to the receiver is ON. "OFF" : No speaker is connected. Subwoofer re-mix setting mode to the receiver is OFF. "LRG" : Relatively large-size speakers. "NML" : Normal-size speakers. "BS" : A surround back speaker is connected to the SURR BACK/SW terminals. "SW" : A subwoofer is connected to the SURR BACK/SW terminals. ÷ When the subwoofer is set to "SUBW OFF", the front speaker is set automatically to "FRNT LRG". ÷ Options "LRG" for the center speaker, surround speakers and back surround speakers can be selected only when the front speakers setting is "FRNT LRG". However, when the surround speaker setting is "SURR NML", option "LRG" for the back surround speakers cannot be selected. Subwoofer re-mix setting If "REMIX ON" is selected as the subwoofer re-mix setting, the low frequencies are enhanced by adding the low frequencies of other channels to the subwoofer channel depending on the speaker setup. Example: 5.1 ch Surround System Subwoofer : "SUBW" Front speakers Center speaker Surround speakers Back Surround speakers BS/SW Amp Subwoofer re-mix setting : "FRNT" : "CNTR" : "SURR" : "BS" : "BS/SW" : "REMIX" ] "ON" ] "LRG" ] "NML" ] "NML ] "OFF" ] "OFF" ] "ON"* Example: 6.1 ch Surround System Subwoofer : "SUBW" Front speakers Center speaker Surround speakers Back Surround speakers BS/SW Amp Subwoofer re-mix setting : "FRNT" : "CNTR" : "SURR" : "BS" : "BS/SW" : "REMIX" ] "ON" ] "LRG" ] "NML" ] "NML" ] "NML" ] "BS" ] "ON"* Example: 7.1 ch Surround System ÷ Connect two surround back speakers (LB and RB) to the PRE OUT SURROUND BACK jacks, see "PRE OUT jacks connections". $ Subwoofer : "SUBW" Front speakers Center speaker Surround speakers Back Surround speakers BS/SW Amp Subwoofer re-mix setting : "FRNT" : "CNTR" : "SURR" : "BS" : "BS/SW" : "REMIX" ] "ON" ] "LRG" ] "NML" ] "NML" ] "NML" ] "OFF" ] "ON"* * When the subwoofer setting is "SUBW ON", front speakers setting is "FRNT LRG" and a stereo source is played, the low frequencies may be reproduced through the front speakers and no audio output from the subwoofer in certain listen modes. In this case, the low-frequency signal can be output from the subwoofer by selecting "REMIX ON" for the subwoofer re-mix setting. ÷ When the speaker setting is set to "BS OFF", the DOLBY PRO LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes cannot be selected. 3 After completing the setup, press the ENTER. If your selection is correct, press the MULTI CONTROL % / fi to select "OK" and press the ENTER . Now the speaker setup is complete. (Select "CANCEL" to return to the status before setup.) ÷ More detailed settings such as the volume level of each speaker and distance to each speaker are also available. ) ~ ¡ STEP 3 Play a disc on the DVD player. 1 Press the INPUT SELECTOR key to select "DVD". 2 Start playback of the DVD player. For the operation, also refer to the instruction manual for your DVD player. ÷ You can select various listen modes to enjoy surround playback of various kinds of video software. › 17 EN