Kenwood VRS-7200 Instruction Manual - Page 18
Preparing for playback
View all Kenwood VRS-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Preparing for playback Speaker settings To enable you to obtain optimum enjoyment from the receiver's listening modes, make sure to complete the speaker settings (subwoofer, front, center, surround and surround back speakers) as described below. RECEIVER SETUP %/fi/@/#, ENTER SOUND ™ RCV MODE ON/STANDBY ENTER, MULTI CONTROL SETUP 1 Turn on the power to this receiver by pressing the ON/ STANDBY key (or the RECEIVER ). 2 If you want to use the remote control unit, press the RCV MODE key on the remote to set it to the receiver control mode. 3 Initiate the setup mode. 1 Press the SETUP key. 2 Use the MULTI CONTROL @ / # (or the @ / # keys) for the following displays. 1 "SP SETUP" 2 "SP LEVEL" 3 "DISTANCE" 4 "ASSIGN." 5 "LFE LEVEL" 6 "GAME FUNC" 7 "EXIT" ÷ While the main setup screen is displayed, the setup mode can be canceled by pressing the SETUP key or selecting "EXIT" and then pressing the ENTER. 4 Select the setup method. 1 Select "SP SETUP" and press the ENTER to select the speaker setup method. 2 Use the MULTI CONTROL @ / # (or the @ / # keys) for the following displays. 1 "HTB1 6.1CH": Select "HTB1 6.1CH" if you use speaker system KS-4200EX*. 2 "HTB1 5.1CH": Select "HTB1 5.1CH" if you use speaker system KS-2200HT*. 3 "HTB2 6.1CH": Select "HTB2 6.1CH" if you use speaker system KS-3200HT*+KS-3200EX*, KS-5200EX* or KS-7200HT*+KS-3200EX*. 4 "HTB2 5.1CH": Select "HTB2 5.1CH" if you use speaker system KS-3200HT*, KS-5200HT* or KS-7200HT*. 5 "HTB3 6.1CH": Select "HTB3 6.1CH" if you use speaker system KS-8200EX*. 6 "HTB3 5.1CH": Select "HTB3 5.1CH" if you use speaker system KS-8200HT*. 7 "CUSTOM": Select to set up the speakers according to the speaker system in use. (Speaker setup is required every time after the speaker system is changed.) 8 "EXIT": Press the ENTER again to return to the main setup displays. * Model availability may differ depending on the country and sales area. ÷ When the 5.1 channel speaker system configuration is used or the speaker setting is set to "BS OFF", the DOLBY PRO LOGIC IIx, DTS-ES and DOLBY DIGITAL EX listen modes cannot be selected. If you selected "HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH", "HTB2 5.1CH", "HTB3 6.1CH" or "HTB3 5.1CH" in the above: Press the ENTER, then press the MULTI CONTROL % / fi (or the % / fi keys) to select "OK", and press the ENTER again to establish the setup. ÷ Select "CANCEL" to return to the status before setup. ÷ When you use a KENWOOD speaker system and select "HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH", "HTB2 5.1CH", "HTB3 6.1CH" or "HTB3 5.1CH" set the speaker setup, the audio will be corrected automatically according to the speaker characteristics. If you selected "CUSTOM" in the above: Press the ENTER to proceed to detailed setups. The flow of the SETUP is as follows; SP SETUP HTB 1 6.1CH HTB 1 5.1CH HTB 2 6.1CH HTB 2 5.1CH HTB 3 6.1CH HTB 3 5.1CH CUSTOM EXIT Subwoofer Front Center Surround Surround Back BS/SW amp Subwoofer Re-mix SP LEVEL DISTANCE AUTO L C R SR BS (RB/LB) SL SW MANUAL/OFF L C R SR BS (RB/LB) METERS FEET EXIT Front Left Center Front Right Right Surround Surround Back (Right/Left Surround Back) Front Left Subwoofer SL ASSIGN. Digital D4 Video EXIT LEF LEVEL GAME FUNC EXIT MODE 1 MODE 2 OFF SW EXIT ÷ The subwoofer setting indication "SUBW" appears. 18 EN Continued to next page