Kenwood VRS-7200 Instruction Manual - Page 27
Listening to radio broadcasts
View all Kenwood VRS-7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Listening to radio broadcasts The receiver can store up to 40 stations in the memory and recall them by one-touch operation. Radio stations can be classified into RDS (Radio Data System) stations and other stations. To listen to or store RDS stations in the preset memory see "Using RDS (Radio Data System) (For Europe and Australia)". ª Tuning (non-RDS) radio stations Presetting radio stations RECEIVER % /fi TUNING 1 / ¡ TUNER, BAND, AUTO/MONO RCV MODE INPUT SELECTOR BAND AUTO/MONO INPUT SELECTOR BAND AUTO/MONO MULTI CONTROL %/fi, ENTER MULTI CONTROL %/fi, ENTER 1 Use the INPUT SELECTOR key (or the TUNER key) to select the tuner. 2 Use the BAND key to select the desired broadcast band. Each press switches the band. Collective presetting of stations (For U.S.A. and Canada) 1 Use the INPUT SELECTOR key (or the TUNER key) to select the tuner. 2 Use the BAND key to select he broadcast band to "FM". 3 Press and hold the ENTER for more than 2 seconds. 3 Use the AUTO/MONO key to select the desired tuning method. Each press switches the tuning method to either auto or manual tuning. 1 Auto tuning: The "AUTO" indicator lights up. 2 Manual tuning: The "AUTO" indicator goes off. "AUTO" indicator lights up in the display. ÷ Normally, set to "AUTO" (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.) 4 Use the MULTI CONTROL % / fi (or the %/fi keys, TUNING 1/ ¡) to select the station. "TUNED" indicator is displayed when a station is received. "ST." indicator lights when a broadcast is being received in stereo. Auto tuning: The next station is tuned automatically. Manual tuning: Use the MULTI CONTROL % / fi (or the %/fi keys) to select the desired station. The "AUTO" display and "PRESET" display appear alternately. ÷ A maximum of 40 stations of the band presently being received will be preset. ÷ Use the Manual Preset function if a desired FM station cannot be preset using the Auto Preset function or when it is required to preset AM stations. Presetting radio stations manually 1 Tune to the station you want to store. 2 Press the ENTER while receiving the station. Proceed to step 3 within 20 seconds. (If more than 20 seconds elapse, press the ENTER again). 3 Use the MULTI CONTROL % / fi (or the % / fi keys) to select one of the station presets (1 - 40). 4 Press the ENTER again to confirm the setting. • Repeat steps 1, 2, 3, and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the old station will be replaced by the new one. 27 EN