Kenwood XD-355 User Manual - Page 28
USING EXTERNAL UNITS, Video/Auxiliary (Audio signal) input, Headphones
View all Kenwood XD-355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
USING EXTERNAL UNITS To the line output socket RCA cord Video/Auxiliary (Audio signal) input To listen to or record signals from external sources through this unit : 1 Use a separately available RCA cord to connect the desired external unit to the VIDEO/AUX sockets. (red = right channel, white = left channel) • When using video equipment (Laser Disc player or VCR), be sure to connect the audio output to this unit and the video output to a television. 2 Press the ON/STANDBY button to turn the power on. 3 Press the VIDEO/AUX button. 4 Operate the external unit. 5 To record the sound from the external unit, per- form steps 2 - 4 of the "Recording from the built-in radio" section on page 23. Note : • To prevent hum interference, do not place this unit near a television receiver. Headphones • Before plugging in or unplugging the head- phones, make sure the volume level is reduced. • Be sure your headphones have a 3.5mm (1/8") diameter plug and are between 16 Ω and 50 Ω impedance. The recommended impedance is 32 Ω. • When headphones are connected, the speak- ers are disconnected automatically. Adjust the VOLUME CONTROL for the desired volume. 28 EN