Kenwood XXV-05V Instruction Manual - Page 45

Displaying the Speaker Set Up screen When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. Speaker Set Up screen 11 12 9 10 10 13 Use 15 14 9 Selects a speaker to be set. (see , page 46) p Selects a speaker type. (see , page 46) q Stores your setup in memory. (see , page 49) w Displays the Speaker Crossover Setup screen. (See , page 49) You can adjust the crossover setup that was set automatically when you selected the speaker type. e Set the use or no use of tweeter. (see , page 46) r Displays the Channel Level Setup screen. t Displays the Car Type Set Up screen. Displaying the Channel Level screen You can set the volume at each setup position. Channel Level screen 18 16 +10 dB 17 17 19 y Selects a speaker to be set. (see , page 47) u Sets the speaker volume. (see , page 47) i Starts or stops test signal tone output for setup check. o Displays to the Speaker Set Up screen. Your setup on the is adjusted automatically to get the best sound effects according to the car type and speaker you have set on the (see page 44). We recommend you to complete the first, then set up the . You can fine-tune the automatic set value by (see page 48), (see page 49), or (see page 71). English 45