Kenwood XXV-05V Instruction Manual - Page 73

Position Fine Control You can fine-adjust your listening position. 1 Display the Position Fine Control screen Adjust Position Fine Control screen 2 1 1 cm 3 cm 4 5 P3 1 6 1 1 Adjusts the volume. 2 Selects a speaker to be adjusted. 3 Indication of setup distance. The adjusted distance (Position and Position Fine Control values), and the total of the distance adjusted by Car Type Set Up (see page 44) and the adjustment distance for position setup are indicated. 4 Adjust the distance to each speaker. 5 Stores the present adjustment setup in memory, or calls it from memory. 6 Exits the Position Fine Control setup and returns to the Position screen. 2 Select a speaker you wish to adjust 3 Set a delay time Store or call your adjustment into/from memory To store your adjustment in memory: P1 - P3 Continue to touch P1 to P3 more than 2 seconds. To call your adjustment from memory: P1 - P3 Touch P1 to P3 of your adjustment you wish to call from memory. • You can also call your adjustment setup in memory using P1 to P3 buttons on the Position screen (see page 72). • Only the adjusted distance of position setup (Position and Position Fine Control values) is stored in memory. Therefore, the final adjustment distance changes if you change the Car Type Set Up value (see page 44). 4 Close the Position Fine Control Screen Return 1 2 3 4 5 6 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker 6 Subwoofer English 73