KitchenAid KDTE304LPA Installation Instructions - Page 1

INSTALLATION INSTRUCTIONS FOR CUSTOM PANEL UNDERCOUNTER DISHWASHER STAINLESS STEEL TUB IMPORTANT: Before installing your dishwasher, please use this instruction sheet as a supplement to the installation instructions. Custom Panel Models Only Gather these additional tools and parts before starting attachment of the custom panel. Read and follow the instructions provided in this instruction sheet. Additional Tools Needed: ■ 3/32" drill bit ■ Torx† T15 screwdriver Additional Parts Supplied with Custom Panel Models: ■ 4 - Plastic studs (attached to each other by runners) ■ 4 - Short screws (10-16 hex-head screw) ■ 4 - Long screws (8-18 Torx head screws) ■ 1 - Template (located inside Use and Care Guide bag assembly) ■ 1 - Instruction sheet (located inside Use and Care Guide bag assembly) NOTE: The screws supplied are used for only 3/4" (19 mm) thick wooden panel. If the wooden panel is less than 3/4" (19 mm) thick, customer must purchase screws locally. Make sure all these parts are included in the literature package. If parts are not included, call 1-800-422-1230. In Canada, call 1-800-807-6777. Follow Steps Below: A customer supplied door panel and handle (together) must weigh no more than 16 lbs (7.3 kg) and must be made to specific dimensions. It is recommended that a cabinetmaker cut the customer panel because of the precise dimensions needed. NOTES: ■ The handle for the custom panel is not included. ■ All mounting hardware supplied is for a 3/4" (19 mm) thick wood panel. If a thinner wood panel or materials other than wood are used, it is the customer's responsibility to obtain the proper length screws and adjust the pilot holes accordingly. WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. Stand dishwasher upright Install Custom Panel Custom panel dimensions 235/8" (600 mm) 2915/16"(760 mm) 3/4" (19 mm) Using 2 or more people, stand the dishwasher up. †TORX and T15 are trademarks of Acument Intellectual Properties, LLC. W11428482A 1