KitchenAid KERS308XSS Use & Care Guide - Page 15

Setting Oven Controls Changing oven temperature display The oven control is preset to display °F (Fahrenheit) when shipped from the factory. The control can be changed to display either Fahrenheit or Celsius. Example — To change the temperature to display °C (Celsius) or °F (Fahrenheit): 1. Press and hold Broil keypad for 6 seconds. 2. Press Self Clean keypad to toggle between Fahrenheit (F) or Celsius (C) temperature display modes (Figs. 1 & 2). 3. Press START to accept choice. Important note: The oven temperature display cannot be modified if Bake or Self Clean is active. Setting Control Lock The control may be programmed to lock the oven control keypads. To activate the Control Lock feature: 1. Press and hold START until you hear a tone indicating Control Lock has been activated. 2. Loc will appear in the display (See Fig. 5). Fig. 5 To cancel the Control Lock feature: 1. Press and hold START until you hear a tone indicating Control Lock has been deactivated. 2. When the Loc message is no longer displayed, the oven control keypads will be available for use. Fig. 1 Fig. 2 Setting silent or audible control mode Silent mode allows the oven control to operate without audible tones. The control may be programmed for silent operation and later returned to operating with all the normal audible tones. Example — To set for silent or audible mode: 1. Press and hold Delay Start keypad for 6 seconds. 2. Press Self Clean keypad to toggle between beep on or beep off. (See Figs. 3 & 4). 3. Press START to accept choice. Important note: If a control keypad is pressed when Control Lock is active, the control may triple beep indicating the keypad action is not available when the Control Lock feature is active. Fig. 3 Fig. 4 15