KitchenAid KERS308XSS Use & Care Guide - Page 7
Removing and replacing, the glide oven, racks, To remove, To replace
UPC - 883049215822
View all KitchenAid KERS308XSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Removing and replacing the glide oven racks To remove: Use thumbs to press both left and right spring-loaded release levers in, (See Fig. 1) and pull both the rack straight out slightly. Release thumb levers, and grab both the upper and lower portions of the glide rack while pulling the rack straight out until reaching the stop position. (See Fig. 2). At the stop, lift up front of rack slightly and continue to pull rack away from oven. (See Fig. 3). Be sure to hold on both upper and lower rack portions when removing from or handling rack outside of the the oven - these rack portions move independently and are difficult to handle unless held together. To replace: Grasping both upper and lower portions of glide rack, lift and place the rack resting evenly between the oven cavity walls. Tilt the front of the rack upward slightly and slide the rack completely into position. Some force may be necessary to make sure the oven rack has snapped completely back into place. DO NOT attempt to close the oven door until all the oven racks are properly positioned inside the oven cavity. Be sure the glide oven racks make contact with the vertical rack sensor located at the left rear oven cavity wall. Fig. 1 Fig. 2 Fig. 3 7