KitchenAid KERS308XSS Use & Care Guide - Page 8
Before Setting Surface Controls
UPC - 883049215822
View all KitchenAid KERS308XSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Before Setting Surface Controls Using proper cookware The size and type of cookware used will influence the radiant element power level setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in both Figs. 1 & 2. Fig. 1 Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 1). Cookware should have flat bottoms that make good contact with the entire surface heating element (See Fig. 2). For more detailed information about the ceramic cooktop see Cooktop maintenance and Cooktop cleaning in the Care & Cleaning section. Cookware material types The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are: Aluminum - Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pitting). If aluminum pans slide across the ceramic cooktop, they may leave metal marks which will resemble scratches. Remove these marks immediately. Copper - Excellent heat conductor but discolors easily. May leave metal marks on ceramic glass (see Aluminum). Stainless - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining. Cast Iron - A slow heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached. Not recommended for use on ceramic cooktops. Porcelain-enamel on metal - Heating characteristics will vary depending on base material. Porcelain-enamel coating must be smooth to avoid scratching ceramic cooktops. Glass - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it may scratch the glass. Flat bottom and straight sides. Tight fitting lids. Weight of handle does not tilt pan. Pan is well balanced. Pan sizes match the amount of food to be prepared and the size of the surface element. Made of material that conducts heat well. Easy to clean. Always match pot diameter to element size. Curved and warped pans. Cookware larger than cooking area marked on cooktop by more than onehalf inch or 12mm. Heavy handle tilts pan. Pan is smaller than the heating area marked on cooktop. Fig. 2 Important note: Do not place empty aluminum, glass or porcelainenamel coated cookware on the ceramic cooktop! The melting point of cookware made with these materials may be reached quickly especially if left empty and they may bond to the ceramic cooktop. If the cookware melts it will damage the cooktop! Be sure to follow all the cookware manufacturers suggestions when using any type of cookware on the ceramic cooktop. 8