KitchenAid KUDD03DTWH Installation Instructions - Page 15

3. Attach dishwasher to upper cabinet mounting brackets. Option 1: Solid surface countertop ■ Attach dishwasher to the side cabinet mounting brackets (installed earlier). A 2. Pull slide rails forward until they snap into position. 1 3. Push top drawer in and repeat above steps for bottom drawer. 4. In the cabinet under the sink, coil excess drain hose and wrap with a zip tie. Plug in dishwasher or reconnect the power. A. Attach dishwasher to side cabinet mounting brackets. Option 2: Wood countertop ■ Attach the dishwasher to the countertop using the folded over mounting tabs located on the top of the dishwasher. A ON OFF ON OFF OFF 1 2 A. Attach dishwasher to countertop using folded over mounting tabs. Complete Installation 1. Pull top drawer slide rails out and set top drawer on slide rails. 5. Select the Rinse Only cycle and press START/RESUME. Allow the dishwasher to fill, rinse and drain. Check for leaks. If leaks are found, secure the connection and repeat this step. If you need Assistance or Service: Please reference the "Assistance or Service" section of the User Instructions or contact the dealer from whom you purchased your dishwasher. 2 2 1 1 15