KitchenAid KUDD03DTWH Installation Instructions - Page 7
Installation Instructions - parts
UPC - 883049128030
View all KitchenAid KUDD03DTWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INSTALLATION INSTRUCTIONS WARNING 2. Drill 1½" (3.8 cm) diameter holes for drain and water hoses and electrical wiring as shown. Holes should be placed ½" (1.3 cm) from back wall. Electrical Shock Hazard Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher. Failure to do so can result in death or electrical shock. 1. Disconnect power. 2. Turn off water supply. Unpack Dish Drawer WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. A ¹⁄₂" (1.3 cm) 25" (63.5 cm) B 8" (20.3 cm) A. Choose left-hand or right-hand drain and water hose route. B. Choose left-hand or right-hand electric wire route. 3. Install mounting brackets 17" (43.2 cm) from floor using screws provided. If needed, drill ¹⁄₈" pilot holes in cabinet. 1. Read valuable information on exterior of shipping box before opening. 2. Remove shipping materials, tape and film from the dishwasher. Remove parts package from inside the dishwasher. Prepare Cabinet Opening 1. To ensure minimum clearance dimensions exist: ■ Measure the distance from the cabinet countertop to the floor and ensure 33³⁄₄" (85.7 cm) minimum height. ■ Measure the distance from the front of the cabinet to the back wall and ensure 24" (61 cm) minimum depth. ■ Measure the distance from the left-hand side to the righthand side of opening and ensure 23½" (59.7 cm) minimum width. 17" (43.2 cm) 4. Decide which dishwasher-to-counter attachment method will be used. 7