KitchenAid KUDD03DTWH Installation Instructions - Page 16
Custom Panel Installation Instructions
UPC - 883049128030
View all KitchenAid KUDD03DTWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CUSTOM PANEL INSTALLATION INSTRUCTIONS Custom Drawer Panels If you plan to install a custom wood panels, you will need to create the panels yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications. IMPORTANT: ■ The thickness of the custom panel must be ¹⁄₂" (12.7 mm) to ³⁄₄" (19.05 mm). ■ Do not exceed the height dimension for the custom panel(s). Panel(s) that exceed the height dimension may damage the drawer dishwasher, cabinets or countertop. ■ The width of the custom panel(s) may vary according to the width of the cabinet opening. Custom Panel Dimensions Preparing Custom Panels 1. Lay the custom panels (top and bottom) face down on a clean, soft work surface. 2. Using a pencil, mark the centerpoints for the 2 panel fastener pilot holes and 6 pilot holes needed for the upper panel. 2¹⁄₂" (6.3 cm) 11¹⁄₄" A 11¹⁄₄" (28.5 cm) (28.5 cm) 8¹⁄₈" 8¹⁄₈" (20.7 cm) (20.7 cm) B 1¹⁄₂" (3.8 cm) (20.2 cm8") Upper drawer panel 23 59.5 cm) C 14¹⁄₈" (36.6 cm) ³⁄₄" (1.9 cm) Lower drawer panel 23 59.5 cm) 16¹⁄₄" (41.3 cm) A. Center line B. Panel fastener pilot holes (2) C. Pilot holes (6) 3. Mark the centerpoints for the 2 panel fastener pilot holes and 4 pilot holes need for the lower panel. 2¹⁄₂" (6.3 cm) 11¹⁄₄" (28.5 cm) A 11¹⁄₄" (28.5 cm) 8¹⁄₈" 8¹⁄₈" (20.7 cm) (20.7 cm) B 1¹⁄₂" (3.8 cm) 10¹⁄₂" (26.7 cm 12³⁄₄" (61 cm) ³⁄₄" (1.9 cm) Hardware Installation Center the hardware (left to right) onto the custom panel. When installing the hardware, be sure that the mounting screws are flush with the back of the custom panel(s). C A. Center line B. Panel fastener pilot holes (2) C. Pilot holes (4) 4. Using a ¹⁄₈" drill, drill each hole ³⁄₈" (1cm) deep. ³⁄₈" (2 cm) IMPORTANT: To avoid drilling through to the front of the custom panel, do not drill deeper than ³⁄₈" (1 cm). 16