Kodak I1860 User Guide - Page 84
Lower imaging guide, remove any streaks.
![]() |
View all Kodak I1860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Lower imaging guide 1. Turn the screw on each end of the lower imaging guide, remove it from its position and set it aside. 2. Carefully vacuum the areas between the lamps, then use a Staticide wipe to thoroughly clean the glass plate between the lamps. 3. Clean the lower imaging guide thoroughly with a Staticide wipe. 4. Wipe the imaging guide again with an almost-dry Staticide wipe to remove any streaks. 5. Reinstall the lower imaging guide. 6. Close the pod. 5-12 A-61555 April 2009
![](/manual_guide/products/kodak-i1860-user-guide-8c5caf6/84.png)
5-12
A-61555 April 2009
Lower imaging guide
1.
Turn the screw on each end of the lower imaging guide, remove it
from its position and set it aside.
2.
Carefully vacuum the areas between the lamps, then use a Staticide
wipe to thoroughly clean the glass plate between the lamps.
3.
Clean the lower imaging guide thoroughly with a Staticide wipe.
4.
Wipe the imaging guide again with an almost-dry Staticide wipe to
remove any streaks.
5.
Reinstall the lower imaging guide.
6.
Close the pod.