Kodak I1860 User Guide - Page 89

Install each new tire by gently pulling it over the core. The tires

Get Kodak I1860 - Document Scanner PDF manuals and user guides View all Kodak I1860 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

If you want to replace the tires, proceed as follows: 6. With one hand, press the locking tabs (one on each side) while holding the bottom housing with the other hand, pull the upper housing up and away from the rollers. Locking tab 7. Remove one core assembly. 8. Replace each tire by sliding the tire off the core. 9. Install each new tire by gently pulling it over the core. The tires do not need to be installed in any specific orientation. IMPORTANT:Do not overstretch the tire; it may tear. A-61555 April 2009 10. Replace the core assembly in the lower feed module housing. 11. Repeat the replacement procedure outlined above for the other core assembly. 5-17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
A-61555
April 2009
5-17
If you want to replace the tires, proceed as follows:
6.
With one hand, press the locking tabs (one on each side) while
holding the bottom housing with the other hand, pull the upper
housing up and away from the rollers.
7.
Remove one core assembly.
8.
Replace each tire by sliding the tire off the core.
9.
Install each new tire by gently pulling it over the core. The tires do
not need to be installed in any specific orientation.
IMPORTANT:Do not overstretch the tire; it may tear.
10.Replace the core assembly in the lower feed module housing.
11. Repeat the replacement procedure outlined above for the other core
assembly.
Locking tab