Kodak I260 User Guide - Page 67
Appendix E Installing Optional Memory, Installing memory in, the scanner
UPC - 041771844417
View all Kodak I260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Appendix E Installing Optional Memory Scanner Model i250 Scanner i260 Scanner i280 Scanner The i200 Series Scanners come installed with the basic amount of memory required for scanning. This may be sufficient for your scanning needs. However, you may install additional memory (SODIMM) in the scanner to accommodate long document scanning or scanning with certain scanner features (e.g., auto-crop at 300 dpi or higher) or to improve scanning performance. Refer to the following chart for scanner memory specifications. Document Size Basic Memory Total Memory Installed in Scanner Allowed in Scanner With standard memory (64 MB): 29.7 x 43.2 cm (11.7 x 17 in.) With extended memory (256 MB): 29.7 x 66.0 cm (11.7 x 26.0 in.) 64 MB 256 MB With standard memory (64 MB): 29.7 x 43.2 cm (11.7 x 17 in.) With extended memory (256 MB): 29.7 x 66.0 cm (11.7 x 26.0 in.) 64 MB 256 MB With standard memory (256 MB): 29.7 x 81.3 cm (11.7 x 34 in.) 256 MB 512 MB IMPORTANT: DDR "Double Data RAM" style modules do not fit in the i200 Series Scanners' CPU board socket. Use only PC-100 and PC-133 style modules. Use proper precautions to avoid static when you install memory. Installing memory in the scanner 1. Power down the scanner. 2. Remove any documents from the feeder area. 3. Disconnect the power cord from the back of the scanner. 4. Disconnect the IEEE-1394 (FireWire) cable from the IEEE-1394 port on the back of the scanner. A-61167 April 2005 E-1