Kodak Z915 User Manual - Page 53
Adjust the camera Video Out setting NTSC or PAL, Decrease Exposure Compensation - blue
UPC - 041771699765
View all Kodak Z915 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Troubleshooting If Try one or more of the following In Review mode, a ■ Transfer the picture to the computer (page 39), then format the card or blue or black internal memory (see page 37). screen is displayed CAUTION: Formatting a card deletes all pictures and videos, instead of a including protected files. picture. Shutter button does not work. ■ Turn on the camera (page 2). ■ Transfer pictures to the computer (page 39), delete pictures from the camera (page 19), switch image storage locations (page 35), or insert a card with available memory (page 3). Slide show does ■ Adjust the camera Video Out setting (NTSC or PAL, see page 37). not run on external ■ See the external device's user's guide. video device. Picture is too light. ■ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Decrease Exposure Compensation (page 16). Picture is not clear. ■ Clean the lens (page 58). ■ Make sure your camera is not in Close-up mode. ■ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Press the shutter button halfway to focus and set exposure. When the framing marks turn green, press the Shutter button completely down. ■ Place the camera on a flat, steady surface or use a tripod. Picture is too dark. ■ Turn on the flash (page 9). ■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and 6.9 ft (2.1 m) in telephoto between the camera and the subject. ■ Use Fill flash (page 9) or change your position so light is not behind the subject. ■ Increase Exposure Compensation (page 16). www.kodak.com/go/support 47