Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/610 User Guide Additi - Page 58

Use of Large Capacity Stacker LS-507, Output Tray, Output Paper Gate, Storage button, Stacker tray,

Get Konica Minolta AccurioPress 6136 PDF manuals and user guides View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

8.2 Use of Large Capacity Stacker LS-507 8 2 Remove paper from the Output Tray. When paper is removed, the Output Paper Gate is opened, and the Output Tray and the holder are automatically housed in the stacker. NOTICE Be sure to check that there is no paper remaining on the Output Tray. Tips If the Output Tray is removed from the holder, follow the procedure below to return it to its original position. If the Output Tray is not loaded correctly, it cannot be returned within the stacker. 1. Press the lit Storage button. The Output Paper Gate is opened, and the holder comes out forward from within the stacker. 2. When the holder stops, load the Output Tray on the holder. Align the three holes of the Output Tray with the protrusions of the holder before loading. If the Output Tray is set to the holder, the Output Tray and the holder are automatically housed in the stacker. Tips You can also remove paper directly from the Stacker tray in the stacker. 1. Press the Eject button twice. The Stacker tray descends and stops halfway. 2. While holding the Output Paper Gate open by hand, remove the paper. At this time, be careful not to get your hand caught in the Output Paper Gate. 3. Close the Output Paper Gate. AccurioPress 6136/6136P/6120 8-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
AccurioPress 6136/6136P/6120
8-9
8.2
Use of Large Capacity Stacker LS-507
8
2
Remove paper from the
Output Tray
.
When paper is removed, the
Output Paper Gate
is opened, and the
Output Tray
and the holder are
automatically housed in the stacker.
NOTICE
Be sure to check that there is no paper remaining on the
Output Tray
.
Tips
If the
Output Tray
is removed from the holder, follow the procedure below to return it to its original position.
If the
Output Tray
is not loaded correctly, it cannot be returned within the stacker.
1. Press the lit
Storage button
.
The
Output Paper Gate
is opened, and the holder comes out forward from within the stacker.
2. When the holder stops, load the
Output Tray
on the holder.
Align the three holes of the
Output Tray
with the protrusions of the holder before loading.
If the
Output Tray
is set to the holder, the
Output Tray
and the holder are automatically housed in the
stacker.
Tips
You can also remove paper directly from the
Stacker tray
in the stacker.
1. Press the
Eject button
twice.
The
Stacker tray
descends and stops halfway.
2. While holding the
Output Paper Gate
open by hand, remove the paper.
At this time, be careful not to get your hand caught in the
Output Paper Gate
.
3. Close the
Output Paper Gate
.