Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/610 User Guide Additi - Page 91

AutoMeasure] adjustment

Get Konica Minolta AccurioPress 6136 PDF manuals and user guides View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

11 [Both Sides Adj.] 11.4 8 Check whether the distance between the paper edge in Large Capacity Stacker LS-507 and the edge stopper is 1 mm. When the check is completed, remove paper. 9 If any adjustments are required, press [Exit PrintMode] to return to the [Standby Pos.(Side Adj.)] screen. 10 Use the on-screen keypad to enter the numeric value. [Adj. Range: -20 ~ +20 1step = 0.1mm] [-] To narrow the standby position, [+] To widen the standby position % Use [+/-] to select the positive or negative value. % Press [Set], and change the current value to the setting value. 11 Repeat step 5 to step 10 until the desired result is obtained. 12 Press [Return]. The screen returns to the [Stacker Adjustment Menu] screen. 11.4 [Both Sides Adj.] User's guide / Correction position

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
11-14
AccurioPress 6136/6136P/6120
[Both Sides Adj.]
11
11.4
8
Check whether the distance between the paper edge in
Large Capacity Stacker LS-507
and the edge
stopper is 1 mm.
When the check is completed, remove paper.
9
If any adjustments are required, press [Exit PrintMode] to return to the [Standby Pos.(Side Adj.)] screen.
10
Use the on-screen keypad to enter the numeric value.
[Adj. Range: -20 ~ +20 1step = 0.1mm]
[-] To narrow the standby position, [+] To widen the standby position
%
Use [+/-] to select the positive or negative value.
%
Press [Set], and change the current value to the setting value.
11
Repeat step 5 to step 10 until the desired result is obtained.
12
Press [Return].
The screen returns to the [Stacker Adjustment Menu] screen.
11.4
[Both Sides Adj.]
<Errata>
11.4.1
[AutoMeasure] adjustment
Both sides of an adjustment chart output from [Print Mode] are scanned using
Intelligent Quality Optimizer
IQ-501
, and the both side adjustment is performed automatically. After adjustment, each adjustment value
([Zoom]/ [Image Shift]/ [Rotate/Skew]) of this screen is updated.
When multiple adjustment charts are printed, adjustment values are obtained from the average, thereby
enabling highly accurate adjustment to be carried out. Up to 20 adjustment charts can be printed out
collectively.
[Auto Measure] is not available on a machine that is not equipped with
Intelligent Quality Optimizer IQ-501
.
Tips
-
On the [MACHINE] screen, press [Adjustment] - [Quality Adj.] - [Periodical Both Sides Adj.] in sequence,
and set [Period. Both Sides Auto Adj.] to [ON]. You can then set [Periodical Adjustment] to [ON] or [OFF].
For the tray set to [ON], [Periodical Adjustment] is available. For details, refer to [Adjustments]
)
[Quality
Adjustment]
)
[Periodical Both Sides Adj.] in the HTML User's Guide.
User's guide / Correction po-
sition
Description
<HTML User's Guide>
[Adjustment]
)
[Both Sides Adj.]
)
[AutoMeasure adjustment]
Change in specifications.
For details, refer to the following.