Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/610 User Guide Additi - Page 84
Press [Exit PrintMode] to return to the [Exit Guide Paper Width Adjustment] screen.
View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
11.3 Finisher Adjustment 11 3 Select the size to be adjusted using [,] or [+]. 4 Press [Print Mode]. 5 Load the paper of the size selected in step 3 , then select that tray. If [Offset Sort] is selected in step 6, select paper size of 210 mm or more ([A4v]). 6 For [Output Setting], select [Sort] or [Offset Sort]. 7 Press Start on the control panel. A test pattern will be output. 8 Check the misalignment (a) of the sheets delivered to the Main Tray. Check the misalignment between printed paper and exit guides in operation to estimate the adjustment amount. Allowance: a = within +1 mm from paper width 9 Press [Exit PrintMode] to return to the [Exit Guide Paper Width Adjustment] screen. 10 If any adjustment is required, use the touch panel keypad to enter the set value. [Adj. Range: -50 ~ +50 1step = 0.1mm] [-] Wide [+] Narrow % Use [+/-] to specify the value to be positive or negative. % If the adjusted width is too narrow, printed paper may be misaligned in the paper feed direction. AccurioPress 6136/6136P/6120 11-7