Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/610 User Guide Additi - Page 90
Standby Pos.Side Adj.]
View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
11.3 Finisher Adjustment 11 11 Press [Return]. The screen returns to the [Stacker Adjustment Menu] screen. [Standby Pos.(Side Adj.)] Adjust the edge stopper position of the Stacker tray to eliminate misalignment or distortion of the output paper. Make adjustments so that the edge stopper is located 1 mm from the edge of the paper. 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. 2 Press [Finisher Adjustment], [Stacker Adjustment], and [Standby Pos.(Side Adj.)] in sequence. 3 When using two units of Large Capacity Stacker LS-507, select either [stacker 1] or [stacker 2]; when using three units of Large Capacity Stacker LS-507, select [stacker 1], [stacker 2], or [stacker 3]. 4 Press the selection key of the paper size to adjust. 5 Press [Print Mode]. 6 Load the desired paper into a tray, and select that tray. 7 Press Start on the control panel. A test pattern is output, and printing is interrupted. A warning message is displayed on the screen. AccurioPress 6136/6136P/6120 11-13