Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/610 User Guide Additi - Page 88

Standby Pos.Rear Adj.]

Get Konica Minolta AccurioPress 6136 PDF manuals and user guides View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

11.3 Finisher Adjustment 11 3 When using two units of Large Capacity Stacker LS-507, select either [stacker 1] or [stacker 2]; when using three units of Large Capacity Stacker LS-507, select [stacker 1], [stacker 2], or [stacker 3]. 4 Press [Print Mode]. 5 Load the desired paper into a tray, and select that tray. 6 Press Start on the control panel. A test pattern is output, and printing is interrupted. A warning message is displayed on the screen. 7 Check whether the distance between the paper edge in Large Capacity Stacker LS-507 and the alignment plate position on the front is 5 mm in the crosswise direction. When the check is completed, remove paper. 8 If any adjustments are required, press [Exit PrintMode] to return to the [Standby Pos.(Front Adj.)] screen. 9 Use the on-screen keypad to enter the numeric value. [Adj. Range: -50 ~ +50 1step = 0.1mm] [-] To narrow the standby position, [+] To widen the standby position % Use [+/-] to select the positive or negative value. % Press [Set], and change the current value to the setting value. 10 Repeat step 4 to step 9 until the desired result is obtained. 11 Press [Return]. The screen returns to the [Stacker Adjustment Menu] screen. [Standby Pos.(Rear Adj.)] Adjust the alignment plate position on the rear side when misalignment occurs in the crosswise direction of the Stacker tray to eliminate misalignment and curl of the stacker tray paper output. Objects of adjustment: [Stacker No.1], [Stacker No.2], [Stacker No.3] Tips Make adjustments together with [Standby Pos.(Front Adj.)]. For details about [Standby Pos.(Front Adj.)], refer to "[Standby Pos.(Front Adj.)]" in "11.3.2 [Stacker Adjustment] (Large Capacity Stacker LS-507)" in this manual. 1 Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen. AccurioPress 6136/6136P/6120 11-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
AccurioPress 6136/6136P/6120
11-11
11.3
Finisher Adjustment
11
3
When using two units of
Large Capacity Stacker LS-507
, select either [stacker 1] or [stacker 2]; when
using three units of
Large Capacity Stacker LS-507
, select [stacker 1], [stacker 2], or [stacker 3].
4
Press [Print Mode].
5
Load the desired paper into a tray, and select that tray.
6
Press
Start
on the
control panel
.
A test pattern is output, and printing is interrupted. A warning message is displayed on the screen.
7
Check whether the distance between the paper edge in
Large Capacity Stacker LS-507
and the
alignment plate position on the front is 5 mm in the crosswise direction.
When the check is completed, remove paper.
8
If any adjustments are required, press [Exit PrintMode] to return to the [Standby Pos.(Front Adj.)] screen.
9
Use the on-screen keypad to enter the numeric value.
[Adj. Range: -50 ~ +50 1step = 0.1mm]
[-] To narrow the standby position, [+] To widen the standby position
%
Use [+/-] to select the positive or negative value.
%
Press [Set], and change the current value to the setting value.
10
Repeat step 4 to step 9 until the desired result is obtained.
11
Press [Return].
The screen returns to the [Stacker Adjustment Menu] screen.
[Standby Pos.(Rear Adj.)]
Adjust the alignment plate position on the rear side when misalignment occurs in the crosswise direction of
the
Stacker tray
to eliminate misalignment and curl of the stacker tray paper output.
Objects of adjustment: [Stacker No.1], [Stacker No.2], [Stacker No.3]
Tips
Make adjustments together with [Standby Pos.(Front Adj.)]. For details about [Standby Pos.(Front Adj.)], refer
to "[Standby Pos.(Front Adj.)]" in "11.3.2 [Stacker Adjustment] (Large Capacity Stacker LS-507)" in this
manual.
1
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.