Konica Minolta Kodak i3450 User Guide - Page 21
Scanner Adjustments, Adjusting the input/ output tray, Adjusting the input, output tray
View all Konica Minolta Kodak i3450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3 Scanner Adjustments Adjusting the input/ output tray You can adjust the input and output trays to accommodate your scanning needs. • Adjusting the side guides - the side guides can be moved in or out to accommodate document size. When adjusting the side guides, place your hands on the bottom of the side guides, over the slots in the tray to slide the guides in and out. • Adjusting the input tray for document length - the input tray extender has two positions. When you are scanning lettersize or A4 documents in landscape mode, you do not need to pull out the input tray extender. - Document lengths up to 11 inches / 27.94 cm - pull the extender out to the first position. - Document lengths from 11 to 17 inches / 27.94 to 43.2 cm - pull the extender out to the full position. - Document lengths more than 17 inches / 43.2 cm - if you are scanning documents longer than 17 inches / 43.2 cm, the scanner driver must be set to accommodate these long documents. Be sure to verify that the Maximum Length option on the Device-General tab (TWAIN Datasource) or the Longest Document option on the Scanner tab (ISIS Driver) is set to longer than the longest document being scanned. A-61771 September 2016 15