Konica Minolta Kodak i3450 User Guide - Page 39

Running a transport cleaning sheet, Final cleaning steps, it and use a new one.

Get Konica Minolta Kodak i3450 PDF manuals and user guides View all Konica Minolta Kodak i3450 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Running a transport cleaning sheet Final cleaning steps The transport should be cleaned with a Transport Cleaning Sheet fed several times. 1. Remove the wrapping from the Transport Cleaning Sheet. 2. Adjust the side guides to the widest position. 3. Place the transport cleaning sheet in the center of the input tray in landscape orientation with the adhesive side up. 4. Scan the transport cleaning sheet. 5. Remove the transport cleaning sheet from the output tray and place it in the center of the input tray in landscape orientation with the adhesive side down and rescan. 6. Steps 4 and 5 may need to be repeated a few times until all residue is removed. NOTE: When the transport sheet gets dirty and/or loses its tackiness, discard it and use a new one. When finished running the transport cleaning sheet: 1. Open the scanner cover. 2. Wipe the exposed side of the upper and lower imaging guides with a lintfree cloth. 3. Close the scanner cover and scan a test image to ensure image quality. A-61771 September 2016 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
A-61771
September 2016
33
Running a transport
cleaning sheet
The transport should be cleaned with a Transport Cleaning Sheet fed several
times.
1.
Remove the wrapping from the Transport Cleaning Sheet.
2.
Adjust the side guides to the widest position.
3.
Place the transport cleaning sheet in the center of the input tray in
landscape orientation with the adhesive side up.
4.
Scan the transport cleaning sheet.
5.
Remove the transport cleaning sheet from the output tray and place it in
the center of the input tray in landscape orientation with the adhesive side
down and rescan.
6.
Steps 4 and 5 may need to be repeated a few times until all residue is
removed.
NOTE:
When the transport sheet gets dirty and/or loses its tackiness, discard
it and use a new one.
Final cleaning steps
When finished running the transport cleaning sheet:
1.
Open the scanner cover.
2.
Wipe the exposed side of the upper and lower imaging guides with a lint-
free cloth.
3.
Close the scanner cover and scan a test image to ensure image quality.