Konica Minolta bizhub 601 bizhub 751/601 Print Operations User Manual - IC-208 - Page 80
For OS 10.3, from Printer Type, select IPP.
View all Konica Minolta bizhub 601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Installation on Macintosh computers 5 2 Click the "Network" icon. 3 From "Show", select "Built-in Ethernet". 4 Click the TCP/IP tab. 5 Select "Configure" items according to the settings for the network to which the Macintosh computer is connected, and then specify the IP address and subnet mask. 6 Click the close button at the upper left corner of the dialog box. - When the "Apply configuration changes?" message appears, click the [Apply] button. Adding a printer 1 Select "HDD" - "Applications" - "Utility" where the driver was installed, and then double-click "Printer Setup Utility" or "Print Center" to open it. 2 When the Add Printer dialog box appears, click the [Add] button. When the printer list appears, click the [Add] button. - If available printers have already been set up, the Add Printer dialog box does not appear. 3 Select "IP Printing" for the connection method. 4 For OS 10.3, from "Printer Type", select "IPP". 5 In "Printer Address", enter the IP address of this machine. - Leave "Queue Name" blank. 6 Select "KONICA MINOLTA" in "Printer Model", select the desired model from the list of model names, and then click the [Add] button. If the selected printer is registered in the printer list, the setting procedure is completed. IC-208 5-13