Konica Minolta bizhub 601 bizhub 751/601 Network Administrator User Manual - Page 77
Printing LPR/Port9100
View all Konica Minolta bizhub 601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Setup items by operation 1 1.19 Printing (LPR/Port9100) Specify settings for printing by using LPR or Port9100. LPR printing is performed via the network using the LPR protocol. LPR printing is used in the UNIX-like OS. Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine connected to the TCP/IP network as a printer of the print destination. Specify the settings according to the following flowchart. TCP/IP Settings ➀ LPR printing ➁ Port9100 printing ➀ ➁ LPD Setting RAW Port Number 1.19.1 1.19.2 Finish ! Detail To print data using LPR or Port9100, settings for the printer driver must be specified after these settings. For details, refer to the User's Guide [Print Operations (IC-208)]. TCP/IP Settings Specify settings to use this machine in a TCP/IP network environment. For details, refer to "Specifying general settings for TCP/IP-based communication" on page 1-2. LPD Setting In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP Setting". Specify the following setting. 1.19.3 Item LPD Definition Select "Enable". Prior confirmation RAW Port Number In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP Setting". Specify the following setting. Item RAW Port Number Definition Select the check box for the port to be used, and then specify the RAW port number. Prior confirmation 751/601 1-64