Home » Konica Minolta Manuals » Printers » Konica Minolta bizhub PRESS C1070/C1070P » Manual Viewer

Konica Minolta bizhub PRESS C1070/C1070P IC-415 User Docs - Page 6

Printer driver

View all Konica Minolta bizhub PRESS C1070/C1070P manuals

Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Printer driver 6 Specific settings do not register with a JDF print job when Add/Map to Paper Catalog is selected and when JDF is enabled on the Fiery Color Server Specify a different paper type other than Plain or Fine for the Paper Catalog entry for the settings to apply to the JDF print job. Error message is not localized after selecting Summary Print and printing a document The error message displays in English instead of the system language, when approximately 100 characters or more are entered in the Instructions text field in Job Properties. Some performance test files are slower than the targeted pages per minute (PPM) rate In print processing speed tests, the speed might be affected by RIP data compression and produce different test results. Depending on the print data, print process speeds may increase from changing the following settings. • Image Quality = Best to Normal • Composite Overprint = ON to Off Cover image of 1-up perfect is incorrect, when Front & Back Together is selected When Front & Back Together is selected, and when the sheet size is larger than the cover image size, the cover image position for 1-up Perfect does not match with the finished sheet size. Match the cover sheets size with the image size. For example, when body sheet size is 8.5x11 and spine width is one inch, use 18 inch x 11 inch sheets for a cover. Output Tray menu displays blank field after changing finisher type When a finisher is connected to the printer and if you change the finisher type, the Output Tray menu in Configure may display an empty field after changing the finisher type. Connect the finisher to the printer again, or change the finisher type so that the Output Tray menu displays "Unassigned". Change of measuring units for 1-up Perfect booklet type In Driver > Print setting > Layout > Booklet, if you specify 1-up Perfect as the booklet type, the measuring unit changes from inches to millimeters. When you confirm the measuring unit in Launch Wizard, the base unit of the operating system also changes from inches to millimeters.

Section	Page
User documentation	1
Where can I find the user documentation?	1
Image Enhance Visual Editor	1
Working with duplicate jobs	1
Printing	1
Direct Connection limitations	1
Help	1
Viewing Help	1
System	1
In a Fiery DHCP connection, a blank hostname displays and not the server name configured in the Fiery Color Server	1
Fiery Setup Wizard	2
Invalid IP address error message appears in Fiery Controller Setup when you enter an IP address	2
Command WorkStation	2
Viewing imported jobs in landscape orientation	2
Flattening error for an imposed print job	2
Jobs with composite overprint and transparent objects	2
After RIPping a job, black colored objects display gray dotted lines	2
In Job Properties, Gang-up Preview always displays image in Portrait view	2
In Fiery Impose-Compose, Sheet View always displays imported job in Portrait view	2
Cannot create a booklet from a one-page document	2
Use embedded profile option with APPE enabled	3
Conflict message appears when Auto-Trapping is selected	3
Preview of a raster job does not match the preview display in Job Properties > Booklet > Mixed Media	3
Paper size settings on the printer does not match settings in Command WorkStation	3
AppleTalk support	3
Incorrect page order with Booklet-Perfect Left Binding	3
When a merged mixed job is opened in Fiery Impose, the display of the form size is incorrect	4
When multiple jobs are imported to the Held Queue in a group, the job order is not cared	4
Output image of body pages from a booklet rotates 90 degrees after printing a Microsoft Word document	4
Printing a document as a booklet or as a 2-up print, with 1-byte or 2-byte TrueType font from a PS file into a PDF document, sometimes results in garbled text output	4
Fiery Color Server hangs temporarily when it loads 500 paper profiles from the printer	4
Error message of “Calibration” is garbled	4
Command WorkStation hangs on a client computer after rebooting the Fiery Color Server	4
Line issue occurs when printing A4 file to A3 size	5
Cannot specify a custom size setting for a 8.5 x 11 sized slip sheet	5
On Command WorkStation for Mac OS, a set count larger than 15 for a new Paper Catalog entry gets saved	5
Display of Processing is not localized	5
Command WorkStation hangs after canceling jobs when waiting for jobs to print	5
Hard disk free space does not increase after performing Factory Defaults on the printer	5
Specific settings do not register with a JDF print job when Add/Map to Paper Catalog is selected and when JDF is enabled on the Fiery Color Server	6
Error message is not localized after selecting Summary Print and printing a document	6
Some performance test files are slower than the targeted pages per minute (PPM) rate	6
Cover image of 1-up perfect is incorrect, when Front & Back Together is selected	6
Output Tray menu displays blank field after changing finisher type	6
Printer driver	6
Change of measuring units for 1-up Perfect booklet type	6
User authentication fails when registering users with two byte characters on LDAP-enabled Fiery Color Servers	7
If “305x458mm” is specified in Microsoft Word 2010, “12x18” is listed instead and applied to the printer driver	7
Borders do not print when setting Papers per sheet to 6-up and turning Print border on	7
On Mac OS 10.8, install the driver by Find Printer By Name or Address, job cannot be output	7
Cannot print a perfect bind document with the Windows and Mac OS printer driver when using European languages	7
Fiery Color Server stops printing a document that has many pages and N-up setting	7
Fiery Impose	7
Impose and Preview do not have the duplex setting “Top Binding”	7
Merged jobs with Composite overprint and transparent objects	8
Fiery JDF	8
Enabling Device Capabilities	8
Fiery Remote Scan	8
Fiery Remote Scan version 6 TWAIN driver is 32-bit only	8
Scan	8
Cannot acquire files from a mailbox in Fiery Remote Scan	8
Scan error message does not display after scanning files larger than 2 GB	8
FTP scan log displays OK status for scan destinations even if FTP scan is disabled	8
Job mismatch with scan jobs	8
Scan 1,000 pages to HDD, incorrect job size is displayed in Fiery Remote Scan and cannot save job file correctly	8
Garbled characters appear in scanned print job file name	9
FTP file name two byte characters have a garbled phenomenon	9
Paper Catalog	9
Fiery Color Server overwrites Paper Catalog profiles registered on the printer	9
Printer	9
On the Web LCD, logging into the printer with login name and password on first attempt does not work	9
Status always displays “Printing” on the Web LCD after printing a copy job	9
Image output orientation displays incorrectly with certain booklet and binding settings	9
When using Port 9100 and Sequential Print, job of the Secure print cannot complete printing	9
Other applications	10
Adobe Reader X does not recognize “Fit” size option for printing	10
Image rotation occurs for a job with 1-up Perfect and Left binding specified and with custom size settings	10
Output error with printing a Microsoft Excel document with multiple spreadsheets on the Fiery Color Server	10
Printing DocuWorks file with Gang-up setting results in extra lines on some pages	10
Some PDF jobs with black letters cannot preserve a K value 100% by the Fiery Color Server	10
Images do not print correctly with solid color objects	10
Misalignment and scale problems with folded and stapled brochure prints	11
Image objects that are pasted onto solid color objects print two black color layouts	11

Match case Limit results 1 per page

Specific settings do not register with a JDF print job when Add/Map

to Paper Catalog is selected and when JDF is enabled on the Fiery

Color Server

Specify a different paper type other than Plain or Fine for the Paper Catalog entry for the

settings to apply to the JDF print job.

Error message is not localized after selecting Summary Print and

printing a document

The error message displays in English instead of the system language, when approximately

100 characters or more are entered in the Instructions text field in Job Properties.

Some performance test files are slower than the targeted pages per

minute (PPM) rate

In print processing speed tests, the speed might be affected by RIP data compression and

produce different test results. Depending on the print data, print process speeds may increase

from changing the following settings.

•

Image Quality = Best to Normal

•

Composite Overprint = ON to Off

Cover image of 1-up perfect is incorrect, when Front & Back Together

is selected

When Front & Back Together is selected, and when the sheet size is larger than the cover

image size, the cover image position for 1-up Perfect does not match with the finished sheet

size. Match the cover sheets size with the image size. For example, when body sheet size is

8.5x11 and spine width is one inch, use 18 inch x 11 inch sheets for a cover.

Output Tray menu displays blank field after changing finisher type

When a finisher is connected to the printer and if you change the finisher type, the Output

Tray menu in Configure may display an empty field after changing the finisher type. Connect

the finisher to the printer again, or change the finisher type so that the Output Tray menu

displays “Unassigned”.

Printer driver

Change of measuring units for 1-up Perfect booklet type

In Driver > Print setting > Layout > Booklet, if you specify 1-up Perfect as the booklet type,

the measuring unit changes from inches to millimeters. When you confirm the measuring

unit in Launch Wizard, the base unit of the operating system also changes from inches to

millimeters.