Home » Konica Minolta Manuals » Printers » Konica Minolta bizhub PRESS C1070/C1070P » Manual Viewer

Konica Minolta bizhub PRESS C1070/C1070P IC-415 User Docs - Page 7

Fiery Impose

View all Konica Minolta bizhub PRESS C1070/C1070P manuals

Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Fiery Impose 7 User authentication fails when registering users with two byte characters on LDAP-enabled Fiery Color Servers When User authentication is enabled, accounts of users that have two byte username characters do not get authenticated with LDAP-enabled Fiery Color Servers. The user can still print with the account. If "305x458mm" is specified in Microsoft Word 2010, "12x18" is listed instead and applied to the printer driver If you specify "305x458" as the page size in Microsoft Word 2010 for the printer, the print server properties window displays "12x18" instead. Set "Output Paper Size" instead of "Document Size". Borders do not print when setting Papers per sheet to 6-up and turning Print border on When you print a Word document with the Papers per sheet setting set to 6-up, and Print border turned on, sometimes border loss occurs with the print output. Send the job to print in Command WorkStation to get the correct print out. On Mac OS 10.8, install the driver by Find Printer By Name or Address, job cannot be output In the Fiery Printer Driver installation, if you find the printer by using the Find Printer By: Name or IP Address feature, install the printer driver with any default queue selection, and then try to print a test page, the document does not print. Reinstall the printer driver and use the Find Printer By: Network Discovery feature to print the test page. Cannot print a perfect bind document with the Windows and Mac OS printer driver when using European languages Send the print job to Command WorkStation, open Job Properties and send the document to print. You can also send the print job directly to the Print queue in Command WorkStation to print the document. Fiery Color Server stops printing a document that has many pages and N-up setting Turn off the N-up setting for Pages per sheet and print the job to avoid the issue. Impose and Preview do not have the duplex setting "Top Binding" In Impose and Preview, the Duplex setting "Top Binding" does not appear after importing a job. After saving the impose settings and try to enable Top Binding in Job Properties, the settings are cleared.

Section	Page
User documentation	1
Where can I find the user documentation?	1
Image Enhance Visual Editor	1
Working with duplicate jobs	1
Printing	1
Direct Connection limitations	1
Help	1
Viewing Help	1
System	1
In a Fiery DHCP connection, a blank hostname displays and not the server name configured in the Fiery Color Server	1
Fiery Setup Wizard	2
Invalid IP address error message appears in Fiery Controller Setup when you enter an IP address	2
Command WorkStation	2
Viewing imported jobs in landscape orientation	2
Flattening error for an imposed print job	2
Jobs with composite overprint and transparent objects	2
After RIPping a job, black colored objects display gray dotted lines	2
In Job Properties, Gang-up Preview always displays image in Portrait view	2
In Fiery Impose-Compose, Sheet View always displays imported job in Portrait view	2
Cannot create a booklet from a one-page document	2
Use embedded profile option with APPE enabled	3
Conflict message appears when Auto-Trapping is selected	3
Preview of a raster job does not match the preview display in Job Properties > Booklet > Mixed Media	3
Paper size settings on the printer does not match settings in Command WorkStation	3
AppleTalk support	3
Incorrect page order with Booklet-Perfect Left Binding	3
When a merged mixed job is opened in Fiery Impose, the display of the form size is incorrect	4
When multiple jobs are imported to the Held Queue in a group, the job order is not cared	4
Output image of body pages from a booklet rotates 90 degrees after printing a Microsoft Word document	4
Printing a document as a booklet or as a 2-up print, with 1-byte or 2-byte TrueType font from a PS file into a PDF document, sometimes results in garbled text output	4
Fiery Color Server hangs temporarily when it loads 500 paper profiles from the printer	4
Error message of “Calibration” is garbled	4
Command WorkStation hangs on a client computer after rebooting the Fiery Color Server	4
Line issue occurs when printing A4 file to A3 size	5
Cannot specify a custom size setting for a 8.5 x 11 sized slip sheet	5
On Command WorkStation for Mac OS, a set count larger than 15 for a new Paper Catalog entry gets saved	5
Display of Processing is not localized	5
Command WorkStation hangs after canceling jobs when waiting for jobs to print	5
Hard disk free space does not increase after performing Factory Defaults on the printer	5
Specific settings do not register with a JDF print job when Add/Map to Paper Catalog is selected and when JDF is enabled on the Fiery Color Server	6
Error message is not localized after selecting Summary Print and printing a document	6
Some performance test files are slower than the targeted pages per minute (PPM) rate	6
Cover image of 1-up perfect is incorrect, when Front & Back Together is selected	6
Output Tray menu displays blank field after changing finisher type	6
Printer driver	6
Change of measuring units for 1-up Perfect booklet type	6
User authentication fails when registering users with two byte characters on LDAP-enabled Fiery Color Servers	7
If “305x458mm” is specified in Microsoft Word 2010, “12x18” is listed instead and applied to the printer driver	7
Borders do not print when setting Papers per sheet to 6-up and turning Print border on	7
On Mac OS 10.8, install the driver by Find Printer By Name or Address, job cannot be output	7
Cannot print a perfect bind document with the Windows and Mac OS printer driver when using European languages	7
Fiery Color Server stops printing a document that has many pages and N-up setting	7
Fiery Impose	7
Impose and Preview do not have the duplex setting “Top Binding”	7
Merged jobs with Composite overprint and transparent objects	8
Fiery JDF	8
Enabling Device Capabilities	8
Fiery Remote Scan	8
Fiery Remote Scan version 6 TWAIN driver is 32-bit only	8
Scan	8
Cannot acquire files from a mailbox in Fiery Remote Scan	8
Scan error message does not display after scanning files larger than 2 GB	8
FTP scan log displays OK status for scan destinations even if FTP scan is disabled	8
Job mismatch with scan jobs	8
Scan 1,000 pages to HDD, incorrect job size is displayed in Fiery Remote Scan and cannot save job file correctly	8
Garbled characters appear in scanned print job file name	9
FTP file name two byte characters have a garbled phenomenon	9
Paper Catalog	9
Fiery Color Server overwrites Paper Catalog profiles registered on the printer	9
Printer	9
On the Web LCD, logging into the printer with login name and password on first attempt does not work	9
Status always displays “Printing” on the Web LCD after printing a copy job	9
Image output orientation displays incorrectly with certain booklet and binding settings	9
When using Port 9100 and Sequential Print, job of the Secure print cannot complete printing	9
Other applications	10
Adobe Reader X does not recognize “Fit” size option for printing	10
Image rotation occurs for a job with 1-up Perfect and Left binding specified and with custom size settings	10
Output error with printing a Microsoft Excel document with multiple spreadsheets on the Fiery Color Server	10
Printing DocuWorks file with Gang-up setting results in extra lines on some pages	10
Some PDF jobs with black letters cannot preserve a K value 100% by the Fiery Color Server	10
Images do not print correctly with solid color objects	10
Misalignment and scale problems with folded and stapled brochure prints	11
Image objects that are pasted onto solid color objects print two black color layouts	11

Match case Limit results 1 per page

User authentication fails when registering users with two byte

characters on LDAP-enabled Fiery Color Servers

When User authentication is enabled, accounts of users that have two byte username

characters do not get authenticated with LDAP-enabled Fiery Color Servers. The user can still

print with the account.

If “305x458mm” is specified in Microsoft Word 2010, “12x18” is

listed instead and applied to the printer driver

If you specify “305x458” as the page size in Microsoft Word 2010 for the printer, the print

server properties window displays “12x18” instead. Set “Output Paper Size” instead of

“Document Size”.

Borders do not print when setting Papers per sheet to 6-up and

turning Print border on

When you print a Word document with the Papers per sheet setting set to 6-up, and Print

border turned on, sometimes border loss occurs with the print output. Send the job to print

in Command WorkStation to get the correct print out.

On Mac OS 10.8, install the driver by Find Printer By Name or Address,

job cannot be output

In the Fiery Printer Driver installation, if you find the printer by using the Find Printer By:

Name or IP Address feature, install the printer driver with any default queue selection, and

then try to print a test page, the document does not print. Reinstall the printer driver and use

the Find Printer By: Network Discovery feature to print the test page.

Cannot print a perfect bind document with the Windows and Mac OS

printer driver when using European languages

Send the print job to Command WorkStation, open Job Properties and send the document to

print. You can also send the print job directly to the Print queue in Command WorkStation to

print the document.

Fiery Color Server stops printing a document that has many pages and

N-up setting

Turn off the N-up setting for Pages per sheet and print the job to avoid the issue.

Fiery Impose

Impose and Preview do not have the duplex setting “Top Binding”

In Impose and Preview, the Duplex setting “Top Binding” does not appear after importing a

job. After saving the impose settings and try to enable Top Binding in Job Properties, the

settings are cleared.