Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta bizhub PRO C754e » Manual Viewer

Konica Minolta bizhub PRO C754e bizhub C754e/C654e Security Operations User Gu - Page 27

Click [OK]., Click [Logout].

View all Konica Minolta bizhub PRO C754e manuals

Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

2.1 Accessing the Administrator Settings 2 % If "Administrator (Admin Mode)" is selected, the settings for the machine system and network can be registered or changed. % If "Administrator (User Mode)" is selected, you can log on to the User Mode as an Administrator. In the User Mode, you can check or delete a job, which is disabled in Administrator Settings. Note, however, that the authority relating to box settings is the same as that of Administrator Settings. % When accessing the Admin Mode using the PageScope Web Connection, enter the same Administrator Password as that for the machine. 6 Click [OK]. % If a wrong Administrator Password is entered, a message that tells that the authentication has failed appears. Enter the correct Administrator Password. % If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized access. If a wrong Administrator Password is entered a predetermined number of times (once to three times) or more set by the administrator of the machine, a message appears saying that the machine accepts no more Administrator Passwords because of unauthorized access for any subsequent entry of the Administrator Password. The machine is then set into an access lock state. To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and then turn on, the main power switch of the machine. If the main power switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the main power switch off, then on again, the machine may not function properly. 7 Click [Logout]. 8 Click [OK]. This allows you to log off from the Admin Mode. bizhub C754e/C654e 2-7

Section	Page
Contents	2
1 Security	6
1.1 Introduction	6
Compliance with the ISO15408 Standard	6
Operating Precautions	6
INSTALLATION CHECKLIST	7
1.2 Security Functions	9
Check Count Clear Conditions	9
1.3 Precautions for Operation Control	11
Roles of the Owner of the Machine	11
Roles and Requirements of the Administrator of the machine	11
Password Usage Requirements	11
User information control server control requirements	12
Security function operation setting operating requirements	12
Operation and control of the machine	12
Machine Maintenance Control	14
1.4 Miscellaneous	15
Password Rules	15
Precautions for Use of Various Types of Applications	16
Encrypting communications	16
Print functions	17
IPP printing	17
Items of Data Cleared by Overwrite All Data Function	18
Fax functions	18
USB keyboard	18
Different types of boxes	19
Hardware and software used in the machine	19
Firmware integrity verification function	19
IPsec setting	20
CS Remote Care function	20
Terminating a Session and Logging out	20
Authentication error during external server authentication	20
2 Administrator Operations	22
2.1 Accessing the Administrator Settings	22
2.1.1 Accessing the Administrator Settings	22
2.1.2 Accessing the User Mode	24
2.2 Enhancing the Security Function	28
2.2.1 Items cleared by HDD Format	30
2.2.2 Setting the Password Rules	31
2.2.3 Setting the Enhanced Security Mode	33
2.3 Preventing Unauthorized Access	36
Setting Prohibited Functions When Authentication Error	36
2.4 Canceling the Operation Prohibited State	38
Performing Release Setting	38
2.5 Setting the Authentication Method	40
2.5.1 Setting the Authentication Method	40
2.5.2 Setting the External Server	43
2.6 ID & Print Setting Function	46
Setting ID & Print	46
2.7 System Auto Reset Function	48
Setting the System Auto Reset function	48
2.8 User Setting Function	50
Making user setting	50
2.9 Account Track Setting Function	56
Making account setting	56
2.10 User Box Function	61
2.10.1 Setting the User Box	61
2.10.2 Changing the user/account attributes and box password	67
2.10.3 Setting Memory RX	72
2.11 Changing the Administrator Password	75
Changing the Administrator Password	75
2.12 Protecting Data in the HDD	78
2.12.1 Setting the Encryption Key (encryption word)	78
2.12.2 Changing the Encryption Key	82
2.12.3 Setting the Overwrite HDD Data	84
2.13 Overwrite All Data Function	86
Setting the Overwrite All Data function	86
2.14 Obtaining Job Log	88
2.14.1 Obtaining and deleting a Job Log	88
2.14.2 Downloading the Job Log data	90
Job Log data	92
2.15 Setting time/date in machine	99
2.15.1 Setting time/date	99
2.15.2 Setting daylight saving time	102
2.16 SSL Setting Function	104
2.16.1 Device Certificate Setting	104
2.16.2 SSL Setting	106
2.16.3 Removing a Certificate	107
2.17 S/MIME Communication Setting Function	108
2.17.1 Setting the S/MIME Communication	108
2.17.2 Registering the certificate	111
2.18 SNMP Setting Function	113
2.18.1 Changing the auth-password and priv-password	113
2.18.2 SNMP access authentication function	119
2.18.3 SNMP v3 setting function	119
2.18.4 SNMP network setting function	119
2.19 WebDAV Function	120
Setting the WebDAV Server Password	120
2.20 TCP/IP Setting Function	123
2.20.1 Setting the IP Address	123
2.20.2 Registering the DNS Server	124
2.21 AppleTalk Setting Function	125
Making the AppleTalk Setting	125
2.22 E-Mail Setting Function	126
Setting the SMTP Server (E-Mail Server)	126
3 User Operations	128
3.1 User Authentication Function	128
3.1.1 Performing user authentication	128
3.1.2 Accessing the ID & Print Document	134
3.2 Change Password Function	136
Performing Change Password	136
3.3 Secure Print Function	139
Accessing the Secure Print Document	139
3.4 User Box Function	143
3.4.1 Setting the User Box	143
3.4.2 Changing the user/account attributes and box password	149
3.4.3 Accessing the User Box and User Box file	156
3.4.4 Sending S/MIME box files	160
4 Application Software	163
4.1 PageScope Data Administrator	163
4.1.1 Accessing from PageScope Data Administrator	163
4.1.2 Setting the user authentication method	166
4.1.3 Changing the authentication mode	168
4.1.4 Making the user settings	171
4.1.5 Making the account settings	172
4.1.6 Registering the certificate	173
4.1.7 DNS Server Setting Function	175
4.1.8 AppleTalk Setting Function	176

Match case Limit results 1 per page

bizhub C754e/C654e

2-7

2.1

Accessing the Administrator Settings

If "Administrator (Admin Mode)" is selected, the settings for the machine system and network can

be registered or changed.

If "Administrator (User Mode)" is selected, you can log on to the User Mode as an Administrator. In

the User Mode, you can check or delete a job, which is disabled in Administrator Settings. Note,

however, that the authority relating to box settings is the same as that of Administrator Settings.

When accessing the Admin Mode using the PageScope Web Connection, enter the same Adminis-

trator Password as that for the machine.

Click [OK].

If a wrong Administrator Password is entered, a message that tells that the authentication has failed

appears. Enter the correct Administrator Password.

If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized

access. If a wrong Administrator Password is entered a predetermined number of times (once to

three times) or more set by the administrator of the machine, a message appears saying that the

machine accepts no more Administrator Passwords because of unauthorized access for any sub-

sequent entry of the Administrator Password. The machine is then set into an access lock state.

To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and

then turn on, the main power switch of the machine. If the main power switch is turned off and on,

the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the

main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it

off. If there is no wait period between turning the main power switch off, then on again, the machine

may not function properly.

Click [Logout].

Click [OK].

This allows you to log off from the Admin Mode.