Kyocera ECOSYS FS-1370DN FS-1370DN Operation Guide (Basic) - Page 72
Printed Results, Corrective Action
View all Kyocera ECOSYS FS-1370DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Printed Results Faint or blurred printing Corrective Action Check the toner container and if necessary replace. Refer to Toner Container Replacement on page 4-2. Clean the charger wire. Refer to Cleaning the Printer on page 4-6. Gray background Check the toner container and if necessary replace. Refer to Toner Container Replacement on page 4-2. Check the developer unit and drum unit are installed correctly. Refer to Cleaning the Printer on page 4-6. Dirt on the top edge or back of the paper If the problem is not solved even after printing several pages, clean the registration roller. Refer to Cleaning the Printer on page 4-6. If the problem is not solved after cleaning, call for service representative. Printing incomplete or out of position Check that the printing settings are correct in the application software and the printer driver. Check whether the problem is being caused by a PRESCRIBE command error. If the problem occurs only with a specific file or program, the most likely cause is an error in a parameter to a command or command syntax. 5-4 Troubleshooting