Kyocera ECOSYS M2135dn ECOSYS M2135dn/M2635dw/M2040dn/M2040dw Operation Guide - Page 163

Operation on the Machine > Loading Originals Loading Originals in the Document Processor The document processor automatically scans each sheet of multiple originals. Both sides of two-sided originals are scanned. (Only on models with a duplex scanning function.) The document processor supports the following types of originals. Weight 50 to 160 g/m2 (duplex: 50 to 160 g/m2)*1 Sizes No. of sheets Maximum Folio (Legal) to Minimum A6 (Statement) Plain paper (80 g/m2): 50 sheets (Mixed size originals: 50 sheets) Thick (120 g/m2): 25 sheets *1 Only on models with a duplex scanning function. Do not use the document processor for the following types of originals. Otherwise, the originals may be jammed or the document processor may become dirty. • Originals bound with clips or staples (Remove the clips or staples and straighten curls, wrinkles or creases before loading. Failure to do so may cause the originals to jam.) • Originals with adhesive tape or glue • Originals with cut-out sections • Curled original • Originals with folds (Straighten the folds before loading. Failure to do so may cause the originals to jam.) • Carbon paper • Crumpled paper IMPORTANT • Before loading originals, be sure that there are no originals left on the original eject table. Originals left on the original eject table may cause the new originals to jam. • Do not make an impact on the document processor top cover, such as aligning the originals on the top cover. It may cause an error in the document processor. 1 Open the original table and then adjust the original width guides. 5-3