Kyocera ECOSYS M2135dn ECOSYS M2135dn/M2635dw/M2040dn/M2040dw Operation Guide - Page 335

Troubleshooting > Using the Maintenance Menu Using the Maintenance Menu You can use the [Maintenance Menu] to adjust the print position and scan position, and maximize the print quality for the elevation of your location. Maintenance Menu User Guide Item Adjust print position Printing start position Center Line Adjust scan position Platen Document Processor Scanning start position Center Line Scanning start position Scan end position Center Line Adjust print quality Drum charge setting Altitude setting Drum refresh Description Enter or select the top margin start position for printing. Value: 0 to 300 mm (in 5 mm increments) Enter or select the left margin start position for printing for each available paper source. This setting is available for each cassette when optional paper feeders are installed. Value: -25 to 25 mm (in 5 mm increments) Enter or select the top margin scan start position for the platen. Value: -45 to 45 mm (in 5 mm increments) Enter or select the left margin scan start position for the platen. Value: -50 to 50 mm (in 5 mm increments) With a document processor installed, enter or select the top margin scan start positions for front and back. Value: -25 to 25 mm (in 5 mm increments) With a document processor installed, enter or select the bottom margin scan end positions for front and back. Value: -25 to 25 mm (in 5 mm increments) With a document processor installed, enter or select the left margin scan start positions for front and back. Value: -50 to 50 mm (in 5 mm increments) When print quality has deteriorated, the output of the main charger can be changed to restore print quality. Value: 1 to 7 If you are using the machine at an altitude of 1,000 m or higher and print quality has deteriorated, the Altitude setting can be used to restore print quality. Value: Normal, 1001 - 2000m, 2001 - 3000m, 3001 - 3500m Perform Drum refresh when images show streaking with white lines. 10-11