Kyocera ECOSYS M2135dn ECOSYS M2135dn/M2635dw/M2040dn/M2040dw Operation Guide - Page 279
Printer, System Menu/Counter
View all Kyocera ECOSYS M2135dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Setup and Registration (System Menu) > System Menu Printer [System Menu/Counter] key key > [Printer] > [OK] key Printing from computers, settings are generally made on the application software screen. However, the following settings are available for configuring the defaults to customize the machine. Item Emulation Set. Alt. Emulation KPDL Error Rpt EcoPrint Override A4/LTR Duplex Copies Orientation Wide A4 FormFeed TimeOut LF Action CR Action Description Select the emulation for operating this machine by commands oriented to other types of printers. Value: Line Printer, IBM Proprinter, EPSON LQ-850, PCL6, KPDL, KPDL (Auto) NOTE When you have selected [KPDL] or [KPDL (Auto)], set "KPDL Error Rpt", too. When you have selected [KPDL (Auto)] as emulation mode, you can switch between KPDL and another emulation mode (alternative emulation) automatically according to the data to print. Value: Line Printer, IBM Proprinter, EPSON LQ-850, PCL6 When an error has occurred during printing in KPDL emulation mode, set whether or not the error report is output. Value: Off, On EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a problem. Value: Off, On Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. Value Off: A4 and Letter are not regarded as the same in size. On: A4 and Letter are regarded as the same in size. The machine will use whichever size is in the paper source. Select binding orientation for duplex mode. Value: Off, Bind Long Edge, Bind Short Edge Set the default number of copies, from 1 to 999. Value: 1 to 999 copies Set the default orientation, [Portrait] or [Landscape]. Value: Portrait, Landscape Turn this to on to increase the maximum number of characters that can be printed in a line for an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This setting is only effective in PCL6 emulation. Value: Off, On Receiving print data from the computer, the machine may sometimes wait if there is no information signaling that the last page does not have any more data to be printed. When the preset timeout passes, the machine automatically prints paper. The options are between 5 and 495 seconds. Value: 5 to 495 seconds (in 5 second increments) Set the line feed action when the machine receives the line feed code (character code 0AH). Value: LF Only, LF and CR, Ignore LF Set the character return action when the machine receives the character return code (character code 0DH). Value: CR Only, LF and CR, Ignore CR 8-33