Kyocera ECOSYS M2135dn ECOSYS M2135dn/M2635dw/M2040dn/M2040dw Operation Guide - Page 287

User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration Enabling User Login Administration Select one of the following authentication methods: Item Descriptions Local Authentication User authentication based on user properties on the local user list stored in the machine. Network Authentication User authentication based on Authentication Server. Use a user property stored in Authentication Server to access the network authentication login page. 1 Display the screen. 1 [System Menu/Counter] key key > [User/Job Account] > [OK] key NOTE If the login user name entry screen appears during operations, enter a login user name and password, and select [Login]. For this, you need to login with administrator privileges. The factory default login user name and login password are set as shown below. Model Name Login User Name Login Password ECOSYS M2135dn/ECOSYS M2635dn/ECOSYS M2635dw 3500 3500 ECOSYS M2040dn/ECOSYS M2540dn/ECOSYS M2540dw 4000 4000 2 key > [User Login Set.] > [OK] key 2 Configure the settings. 1 key > [User Login] > [OK] key key > [Local Authentic.] or [Netwk Authentic.] > [OK] key NOTE Select [Off] to disable user login administration. When selecting [Netwk Authentic.] 1 key > [NTLM], [Kerberos] or [Ext.] > [OK] key 2 Enter the host name (64 characters or less) for the Authentication Server and select the [OK] key. 3 Select the domain name for the Authentication Server, and select the [OK] key. If the domain has not been set, select the number where is displayed and select [Menu]. Select [Edit] and select the [OK] key then enter the domain name (in 256 characters or less). Select the [OK] key and the domain will be registered. To edit or delete a domain name that has already been registered, select that domain name and select [Menu]. NOTE Up to 10 domain names can be registered. 9-3