Kyocera ECOSYS M2135dn ECOSYS M2135dn/M2635dw/M2040dn/M2040dw Operation Guide - Page 304

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration ID Card Settings If ID card authentication is enabled, select the authentication type. NOTE This functions appears when the Card Authentication Kit is activated. Optional Applications (page 11-6) 1 Display the screen. 1 [System Menu/Counter] key key > [User/Job Account] > [OK] key NOTE If the login user name entry screen appears during operations, enter a login user name and password, and select [Login]. For this, you need to login with administrator privileges. The factory default login user name and login password are set as shown below. Model Name Login User Name Login Password ECOSYS M2135dn/ECOSYS M2635dn/ECOSYS M2635dw 3500 3500 ECOSYS M2040dn/ECOSYS M2540dn/ECOSYS M2540dw 4000 4000 2 key > [User Login Set.] > [OK] key 2 Configure the settings key > [ID Card Settings] > [OK] key The following settings can be selected. Item Descriptions Key Login Additional Auth.*1 When ID card authentication is enabled, select whether or not login by keyboard is allowed. Value: Permit, Prohibit Select whether or not to require password entry after authenticating by ID card. Value: Off, Use Password, Use PIN Code*2 *1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in "Network Authentication". *2 This function appear when [Network Authentication] is selected for the authentication method and the server type is set to [Ext.] in "Network Authentication". 9-20