Kyocera ECOSYS P3155dn P3145dn/P3150dn/P3155dn Operation Guide - Page 199

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration NW User Property (Obtain Network User Property) Set the required information to obtain the network user property from the LDAP server. NOTE • This setting only appears when the "Login Type" of "User Login" is set to [Netwk Authentic.] and the "Server Type" is set to [NTLM] or [Kerberos]. Enabling User Login Administration (page 9-3) • Setting to obtain network user information is performed from the operation panel. The details of the information to be obtained should be set with Command Center RX. Command Center RX User Guide 1 Display the screen. 1 [Menu] key key > [User/Job Account] > [OK] key NOTE If the login user name entry screen appears during operations, enter a login user name and password, and select [Login]. For this, you need to login with administrator privileges. The factory default login user name and login password are set as shown below. Login User Name: ECOSYS P3145dn: 4500 ECOSYS P3150dn: 5000 ECOSYS P3155dn: 5500 Login Password: ECOSYS P3145dn: 4500 ECOSYS P3150dn: 5000 ECOSYS P3155dn: 5500 2 key > [User Login Set.] > [OK] key 2 Configure the settings key > [NW User Property] > [OK] key The setting items are as follows. Off/On Item Authenticat Type Descriptions Set whether or not network user information is acquired. Value: Off, On Set the authentication method. Value: Simple, SASL 9-10