Kyocera ECOSYS P3155dn P3145dn/P3150dn/P3155dn Operation Guide - Page 59

Installing and Setting up the Machine > Energy Saver function Sleep Level (Energy Saver and Quick Recovery) (models except for Europe) For sleep level, you can toggle between the following two modes: Energy Saver mode and Quick Recovery mode. The default setting is Energy Saver mode. Energy Saver mode reduces power consumption even more than Quick Recovery mode, and allows Sleep Mode to be set separately for each function. The ID card cannot be recognized. NOTE If the optional Network Interface Kit is installed, this function will not be displayed. Follow the steps below to select the sleep level and use Energy Saver mode for each function. 1 Display the screen. [Menu] key key > [Device Common] > [OK] key key > [Timer Setting] > [OK] key key > [Sleep Level Set.] > [OK] key key > [Sleep Level] >  [OK] key 2 Select the Sleep level key > [Quick Recovery] or [Energy Saver] > [OK] key When [Energy Saver] is set, next go on to set whether or not to use Energy Saver mode for each function. 3 Set the Sleep rule. 1 key > [Status] > [OK] key 2 Select the function to be set, and select the [OK] key. [Card Reader] is displayed when the optional Card Authentication Kit is activated. 3 key > [Off] or [On] > [OK] key Repeat steps 3-2 to 3-3 to set for a different function. Power Off Rule (models for Europe) The Power Off Rule is used to stop the power from automatically turning off. The default preset time is 3 days. For more information on Power Off Rule settings, refer to the following: Power Off Rule (models for Europe) (page 8-31) 2-26