Kyocera ECOSYS P3155dn P3145dn/P3150dn/P3155dn Operation Guide - Page 64
Installing and Setting up the Machine > Installing Software, If Wi-Fi or Wi-Fi Direct is enabled
View all Kyocera ECOSYS P3155dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Installing and Setting up the Machine > Installing Software 4 Install the software. 1 Select the device to be installed. 1 2 IMPORTANT If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name. Installation may fail if the host name is specified. NOTE • The machine cannot be detected unless it is on. If the computer fails to detect the machine, verify that it is connected to the computer via a network or USB cable and that it is turned on and click (Reload). • If the desired device does not appear, select [Add custom device] to directly select the device. 2 Select the driver to be installed. 1 2 3 2-31
2-31
Installing and Setting up the Machine > Installing Software
4
Install the software.
1
Select the device to be installed.
2
Select the driver to be installed.
IMPORTANT
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port
name. Installation may fail if the host name is specified.
NOTE
•
The machine cannot be detected unless it is on. If the computer fails to detect the
machine, verify that it is connected to the computer via a network or USB cable and
that it is turned on and click
(Reload).
•
If the desired device does not appear, select [
Add custom device
] to directly select
the device.
1
2
2
3
1