Kyocera ECOSYS P3155dn P3145dn/P3150dn/P3155dn Operation Guide - Page 95
Loading Paper in the Multi Purpose Tray, Open the multi purpose tray.
![]() |
View all Kyocera ECOSYS P3155dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Preparation before Use > Loading Paper Loading Paper in the Multi Purpose Tray The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m2). For details of the supported paper sizes, refer to the following: Choosing the Appropriate Paper (page 11-14) For the paper type setting, refer to the following: Media Type Setting (page 8-9) Be sure to use the multi purpose tray when you print on any special paper. IMPORTANT • If you are using a paper weight of 106 g/m2 or more, set the media type to Thick and set the weight of the paper you are using. • Remove each transparency from the top tray as it is printed. Leaving transparencies in the top tray may cause a paper jam. The capacity of the multi purpose tray is as follows. • Plain paper (80 g/m2), recycled paper or color paper: 100 sheets • Thick paper (106 to 220 g/m2): 5 sheets • Thick paper (104.7 g/m2): 100 sheets • Hagaki (Cardstock): 1 sheets • Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2: 5 sheets • OHP film: 1 sheet NOTE • When you load custom size paper, enter the paper size by referring to the following: Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting or the Bulk Feeder (Bulk Feeder Setting)) (page 3-17) • When you use special paper such as transparencies or thick paper, select the media type by referring to the following: Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting or the Bulk Feeder (Bulk Feeder Setting)) (page 3-17) 1 Open the multi purpose tray. 3-11
![](/manual_guide/products/kyocera-ecosys-p3145dn-p3145dnp3150dnp3155dn-operation-guide-f46eda7/95.png)