Kyocera ECOSYS P3155dn P3145dn/P3150dn/P3155dn Operation Guide - Page 49

Installing and Setting up the Machine > Network Setup Network Setup Configuring the Wired Network The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms. Set up TCP/IP (IPv4) to connect to the Windows network. Configuration Method Configuring the Connection from the Operation Panel on This Machine Configuring Connections on the Web Page Description Configuring the wired network settings from System menu. For the equipped network interface, the connection can be set by using Command Center RX. For the optional IB-50, the connection can be set by using the dedicated Web page. Setting the Connection by Using the Setup Utility of IB-50 This is the setup tool included in the CD of IB-50. You can use it on Windows. Be sure to connect the network cable before configuring the settings. Connecting LAN Cable (page 2-7) For other network settings, refer to the following: Network (page 8-13) Reference Page IPv4 setting (page 2-16) Command Center RX User Guide IB-50 Operation Guide IB-50 Operation Guide NOTE If user login administration is enabled, you can only change the settings by logging in with administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter a login user name and password, and select [Login]. The factory default login user name and login password are set as shown below. Login User Name: Login Password: ECOSYS P3145dn: 4500 ECOSYS P3155dn: 5500 ECOSYS P3145dn: 4500 ECOSYS P3155dn: 5500 ECOSYS P3150dn: 5000 ECOSYS P3150dn: 5000 IPv4 setting 1 Display the screen. [Menu] key key >[Network] > [OK] key key > [Wired Netwk. Set] > [OK] key key >[TCP/IP Settings] > [OK] key key > [IPv4 Setting] > [OK] key 2 Configure the settings. When using DHCP server 1 key > [DHCP] > [OK] key key > [On] > [OK] key 2-16