Kyocera ECOSYS P6230cdn P6230cdn Operation Guide - Page 48
Login/Logout, Login, Logout - default password
![]() |
View all Kyocera ECOSYS P6230cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Installing and Setting up the Machine > Login/Logout Login/Logout If you are setting a function that requires administrator rights, you must enter your administrator ID and administrator password. NOTE The factory default administrator ID and administrator password are set as shown below. Administrator ID: 3000 Administrator Password: 3000 Login 1 Enter the administrator ID. If the administrator login screen appears while you a using the machine, enter the administrator ID and select the [OK] key. NOTE Enter an ID consisting of between 1 and 16 numbers. Select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the cursor left or right. 2 Enter the administrator password. Enter the administrator password and select [OK] key. NOTE Enter a password consisting of between 0 (no settings) and 16 numbers. Select the [▲] or [▼] key to enter a number. Select the [◄] or [►] key to move the cursor left or right. 3 Select the [OK] key. Logout Select the [Menu] key to exit the setting menu screen and log out. You will return to the normal screen. Users are automatically logged out in the following circumstances: • When the machine enters the sleep state. • When the auto panel reset function is activated. 2-13
![](/manual_guide/products/kyocera-ecosys-p6230cdn-p6230cdn-operation-guide-375c834/48.png)